25 year aluminum profile manufacturer, 6060 6061 6063 6082 grade aluminium profile
Honduras ,Guatemala
Free dies for new client, please email us for details.
Taixing Shuntian was founded in 1994. Our assets reach 800 0000 Dollar. Have 3000 window and door aluminium profile designs for 30 different country markets, have 600 different deinges for heat sink. can supplier 3000 tons every month for aluminum profiles.
1) Thermal break aluminium profile
Colors: Powder Coated | Anodizing | Polishing Bright
Usage: Window | Door | Closet | Bathroom| Curtain Wall | Industry
If your profile require good quantity, We will do free moulds for you.
2)Aluminium Profile Alloy
6063 T4/T5
6061 T5/T6
6060 T6
6082 T6
6463 T5 For polishing
7075 T6
3)About Alloy 6063
- Corresponds to the following standard designations and specifications Honduras ,Guatemala aluminium profile :
AA6063 | Al Mg0.7Si |
GS10 | AlMgSi0.5 |
A-GS | 3.32206 |
ASTM B210 | ASTM B221 |
ASTM B241 (Pipe- Seamless) | ASTM B345 (Pipe- Seamless) |
ASTM B361 | ASTM B429 |
ASTM B483 | ASTM B491 |
MIL G-18014 | MIL G-18015 |
MIL P-25995 | MIL W-85 |
QQ A-200/9 | SAE J454 |
4)About aluminium profile Alloy Composition
Alumin um Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | impurity | Al |
6063 | 0.2-0.6 | <0.35 | <0.1 | <0.1 | 0.45-0.9 | <0.1 | <0.1 | <0.1 | <0.15 | Rest |
6063A | 0.3-0.6 | 0.15-0.35 | <0.1 | <0.1 | 0.6-0.9 | <0.05 | <0.15 | <0.1 | <0.15 | Rest |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | <0.15 | 0.8-1.2 | 0.04-0.35 | <0.25 | <0.15 | <0.15 | Rest |
LTF21 | <0.6 | <0.7 | <0.2 | 1.0-1.5 | <0.05 | <0.1 | <0.15 | <0.1 | Rest | |
6005 | 0.6-0.9 | <0.35 | <0.1 | <0.1 | 0.4-0.9 | 0.1 | <0.1 | <0.1 | <0.15 | Rest |
- Typical mechanical properties for Honduras ,Guatemala aluminium profile
Aluminum Grade | Temper | Wall Thickness | Resist Pull Point(Mpa) | Stretch (Rpo.2 Mpa) | Stretch Rate | Webster Hardness |
6063 | T5 | All | 160 | 110 | 8 | 8 |
T6 | All | 205 | 180 | 8 | ||
6063A | T5 | =<10 | 200 | 160 | 5 | 10 |
T6 | >10 | 230 | 190 | 5 | ||
6061 | T4 | All | 180 | 110 | 16 | |
T6 | All | 265 | 245 | 8 | ||
LTF21 | O,H112 | All | =<185 | 260 | 16 | |
6005 | T5 | =<3.2 | 260 | 240 | 8 | |
>3.2-25 | 260 | 240 | 10 |
We have more than 30 countries moulds for aluminium profiles used in window and doors.
5) About Us
We are one of the largest manufactuers aluminium profile in south of China, We were found on 1994, and have more than 3000 desgins in hand , exported over more than 30 countries..
Our Service for all client are :
Service Time : 7*24 hours total 365 days. (You can call or email us anytime, And we will reply you within 1 or 2 hours.
Quality: Approval SGS, BV test
Free dies for new client, please email us for details.
Thank to our client support in the past ten years and welcome you join us, special for aluminium profile.