multi function bbq thermometer, digital kitchen laboratory thermometer timer 

FOOD THERMOMETER & TIMER S-H09

This device provides you with an easy to use the Thermometer & Timer with alarm function in kitchen, factory or BBQ.
Product Size: 76x79x15mm
LCD Size:  39x22mm

USING THE THERMOMETER 
1.Use one 1.5 volt. AAA Battery.
2.Push the TIMERTHERMO to THERMO 
3.The thermo-temp. and set temp. will be displayed
The thermo-temp. is showing the current temperature.
The thermo-temp. is showing set temperature for alarm function.
25°C  THERMO-TEMP
50°C  SET-TEMP
4.The default set –temp. is 50°C. Use the UP or DOWN button to set the proper temperature 
  To decrease the set –temp. press DOWN
  To increase the set –tem. press UP 
  Hold the DOWN or UP button down for a fast decrement or increment.
5.If you have set a wrong temperature, simply press DOWN and UP simultaneously to reset 
6.Press the START button once ,the alarm stand –by mode  will replace the setting mode 
7.The alarm will sound when the THERMO- TEMP. reaches the SET-TEMP.
8.Press STOP button once to stop the alarm . Temp. Range: -50°C~300°C (-58°F~572°F)

USING THE TIMER 
The timer is used to keep track of your setting time in hours ,minutes and/or seconds
1. Push the TIMER-THERMO button to the TIMER .The setting mode will be dispayed.
2. Press the MIN and SEC buttons simultaneously to reset.(You may repeat this step anytime to stop or reset the unit.)
3. Use the MIN and SEC buttons to set the time. Press MIN to set minutes and / or hours. Press SEC to seconds .
Hold the MIN or SEC button down for a fast increment .When the minute digit Reach 60,it will advance to an hour.
4.If you have set a wrong time, rest (refer to step 2)
5.If you have set the correct time , press the START button once.
 NOTE: Once the time has been set ,DO NOT push the TIMER –THERMO button , since it Will cancel the set time .
6.The alarm stand –by mode   replaces the setting mode    the time starts to count down
7.The timer will sound when it counts down to 00:00 00 .
8.Press the STOP button once to stop the alarm.
9.The unit will return to its pre-set position . Your may reset the unit or start again.
10.1.1m Sensor wire.
11.Working temperature range (0°C~50°C. 32°F~122°F)
12. Please do not surpass 300°C object with this tester

multi function bbq thermometer, digital oven thermometer picture: