Hydraulic dc solenoid valve 24 volt

Descriptions

The functioning principle of this solenoid valve is very simple and extremely safe. The coil, when under tension, releases and springs up the closing device. The reset is manual to check the causes for gas detection.During normal conditons there is no electric absorption, no wear and tear.

The versions can be equipped with a button that allows to close manually the gas substituting the manual tap of the gas line allowing also to test at intervals the good working of the solenoid valve.

Technical Parameters

Use: not aggressive gases of the 3 families(dry gases)

• Threaded connections Rp (brass body): (DN 15 ÷ DN 25) according to EN 10226
• Power supply voltage:12 VDC 12 V/50 Hz, 24 VDC 24 V/50 Hz, 230V AC 230 V/50-60 Hz
• Power supply voltage tolerance:-15% ... +10%
• Power absorption:see product label
• Max. working pressure:500 mbar
• Environment temperature:-15 ÷ +50 °C
• Closing time:<1 s

Exploaded View

Dimensions

...