Specifications

carbon filter mat
1.ISO9001-2008
2.Efficiency:99.99%
3.service time:5000-6000h

Material: activated carbon

Structure: End cover plus skeleton and filter layer

Application: industry. include: pure water, electroplating line, printed circuit board, coating, solvents, detergent, medicine water, oral liquid, pharmaceutical injection, beverage, wine .etc

Function: It can effective move organic matter in liquid , particulate , rust , residual chlorine , peculiar smell . etc .

 

Work principle:

1.The inner most of filter element is PP skeleton use it to strengthen compression strength of filter element .

2.There are two layer PP fiber felt on the skeleton , can stop the more than 10 microns particles which brought out by the liquid through carbon core .

3. Outer sphere of carbon core have two layer PP superfine fiber felt , can stop the more than 10-20 microns particles which in liquid , so the filter element have double function – filtrating and cleansing .

Feature:

1. activated carbon filter element is a new type deep layer filtrating product

2. set adsorption , filtration , intercept , catalysis in one body .

3. acid , alkali , salt and different kinds of organic solvent .

4. high filtrating precision , big flow , small differential pressure , high compression strength , big quantity accept dirt . non-toxic , tasteless , non-secondary pollution .

 

Technical parameters

1. Iodine adsorption value : 900 mg/g
2. Benzene adsorption value : 20-25 %
3. Methylene blue adsorption values : 13-16 ml/g
4. Removal rate of COD : 58.25 %
5. Residual chlorine removal rate : more than 96.83 %

 

Technical parameters :

 

Name	Model	Length(inch)	Micron rating (um)	OD (mm)	ID (mm)	Form of port	Working temperature(°C)	Nominal pressure (MPa)	Pressure loss (MPa)
									Initial	Max
Activated carbon filter element	HTLX-*×10	10 20 30 40	1-10	65	30	Insert type , flat sub type	60	0.7	No more than 0.1	0.4
	HTLX-*×20
	HTLX-*×30
	HTLX-*×40