Low emissivity coated glass is also called Low-E glass. Low-E glass is a kind of glass whose surface is coated with low emissivity coating silver and metal-oxide film so that the glass takes on different colors. Its mainly functions are to reduce the U value of glass, selectively reduce Sc and comprehensively improve energy saving property of glass. It mainly features: high infrared reflectivity, ability to directly reflect far infrared thermal radiation, low surface emissivity, weak ability to absorb external energy, hence little reradiated heat energy; wide range of shading coefficient Sc, and ability to control sun light transmittance according to needs to cater to requirements of different areas. It can be divided into high transmission low-E glass and sun shading low-E glass.

High transmission Low-E glass: shading coefficient of Sc≥0.5, reducing little transmitted sun light. It is very suitable to be used in the northern area which usually adopts heating system. In winter, sun rays can penetrate this kind of Low-E glass to reach houses. After absorbed by indoor objects, they become far infrared thermal radiation not able to penetrate Low-E glass. Such thermal radiation is confined indoors together with the thermal radiation emitted by indoor heaters, so that heating costs can be reduced.

Sun-shading Low-E glass: shading coefficient of Sc<0.5, reducing much transmitted sun light. It is very suitable to be used in the southern area which usually uses air-conditioners. In summer, it can to the largest extent prevent sun rays from reaching houses as well as block far infrared thermal radiation from outdoors, so that the costs of air conditioning can be reduced.

According to the layer of silver contained in the film structure, it can also be divided into single-silver Low-E glass, double-silver Low-E glass and three-silver low-E glass. On some occasions, a kind of Low-E product that is high-transmitting and requires very low shading coefficient is needed. Therefore, double-silver Low-E glass came into being. In normal cases, if the shading coefficient is the same, double-silver Low-E glass has higher visible light transmissivity than single-silver Low-E glass. Three-silver Low-E glass with the same shading efficient has even higher visible light transmissivity. Double-silver glass can be used on nearly any occasion. It has the following several characteristics: lower shading coefficient than sun shading Low-E glass, low radiance, heat preservation, low reflectivity, and fine permeability.

Low-E insulating glass is preferred kind of energy-efficient building materials for energy-saving buildings advocated by the country. It reaches and even far exceeds the national required standards for energy conservation of materials used in public buildings and residential buildings. Relying on vacuum magnetron sputtering method, it, after the surface of common building glass is coated with metallic silver and auxiliary layer, is integrated with another piece of glass through various technology into insulating glass with dry air in the middle. Compared with common energy-saving glass, Low-E insulating glass can, through silver’s very high reflectivity of heat radiation, keep more energy from sunlight outdoors in summer while ensuring natural lighting indoors. In winter, it better prevents indoor heat from getting out of room from the glass, so that obvious effects of energy conservation for building can be produced. Compared with common single glazing, energy-saving glass (Low-E insulating glass) can better preserve heat. It can save 67-70% of energy, consuming around 40% less energy compared to common insulating glass (see the table below

 Product Specification  Product thickness: 3mm-19mm  Maximum size: 3300mm-6000mm