Specifications

CUTTING SPEED:<2MIN/PIPE
BEVEL SPEED:<5 MIN/(DN200 SCH40)
DIA:DN100-600
WALL THK:3-100
BEVEL SHAPE:U,X,V,J AND DOUBLE Vs

Performance features

      Basic structures: one 6m container made with special technology, 1 effective pipeline band saw, 1 Fixed-type Radial Pipe End Beveling Machine and 1 Piping Cantilever Crane.

      Production capacity: Cutting Speed: ≤2 Min / pipeline, Beveling Speed: ≤5 Min / pipeline (DN200 SCH40)

      Mobility: Excellent (without limitation of radiation radius when using container as carrier)

      Bevel quality: good

      Application: for cutting the bevels of the pipes with thick wall.

Technical parameters

      Pipe diameter applicable: DN50~600(φ60~610)

      Pipe wall thickness applicable: 3~100MM

      Materials applicable: carbon steel, alloy steel, stainless steel and cryogenic steel

      Cutting length: Without limitation

      Bevel shape: , ,  and two Vs

      Limited lifting weight: 1 ton

      Conveying system: each supporting trolley is provided at the materialin and the materialout side of the band saw machine; a crane is used to get the pipes in or take them out; a supporting trolley is provided at the material in/out side of the beveling machine and a crane or cantilever beveling machine is used to get the pipes in or take them out. A Pipe Logistics Transport System for End Beveling Machine with a lifter shall be mounted in front of the beveling machine to automatically adjust the elevation of the pipes so as to bevel the pipes of different diameter if required; a VF conveying system for the sawn material driven by motor can be equipped in front of or at the back of the band saw machine.

      Length-fixing system: a mechanical Length-fixing system could be provided if necessary so as to fix the length of the pipes as well as cut and bevel them with the supporting of the conveying system.