Specifications

Good Quality 4 pin Sata Power Cable for monitor  

Specifications:

1. SATA 4P Power Cable
2. 4P IDC type to 4P power

3. Housing: PBT, LCP

4. Power Cable: UL1007 18 / 20 AWG, Tinned Copper

5.Used for computer

Features:

1.This cable can convert any standard 4-Pin power lead into two 15-Pin Serial ATA (SATA) power leads.
2.Great for users with limited numbers of SATA power cables and multiple SATA drives, or for a power supply that does not provide one.
3.Transfer a 4-Pin power connector to 2 SATA Female power connectors
4.Suit for 3.5” SATA Hard Disk and 3.5” SATA CD-ROM; DVD-ROM; DVD-R/W; CD-R/W and so on.
5.Easy to install and easy to use
6.Simple connect the 4pin male connector to a 4pin female connector which is supplied by your computer power adapter
7.Compliant with Serial ATA 1.0 Standards
8.Connector A: 2*15pin SATA Female connector
9.Connector B: 4 pin Male Molex connector

Electrical:

1. Hi-Pot Test: DC300V

2. Insulation Resistance: 10M Ohms (Min)

3. Contactor Resistance: 1 Ohms (Max)

4. 100% Open Short and Miss Wire Test

Cable assembly:

Straight and right angle cable exits.

1) Low pin count using serial data transmission, Four signals and three grounds.
2) Cable length comparable to S-ATA (<1M).
3) Transfer rate exceeding best S-ATA (~150 MB/s) with scalability to higher rates.