Specifications

New Displayport DP to VGA Adapter Converter

 Specifications:

• Display Port v1.1 compliant
• High quality optional digital audio transmission
• Embedded clock architecture to reduce EMI susceptibility
• Support resolutions greater than QXGA (2048 x 1536) at 24-bit colour depths
• Support existing VESA and CEA standards
• Support hot plug and un-plug detection as well as link status-failure detection
• Support reduced bandwidth transimission via direct drive over a 15 meter cable
• Support a minimum of 1080p resolution at 24bpp, 50/60 Hz at 15 metres
• Support conversion from Display Port signal to VGA signal
• Support DisplayPort connector 20 pin
• Support 8-bit&10-bit Deep Color
• Support video bandwidth up to 10.8Gbps
• Support the 1Mbps' bidirectional auxiliary channel
• Support the one lane, one direction, four-line connector

Features:

• Tansmit the DisplayPort signal to VGA signal. It is not a bi-directional adapter. It won't pass signal from VGA port to DisplayPort. With built in IC chipset.
• Supports display resolution up to: 1920x1200(WUXGA-R), 60Hz, 8bpc: 154MHz, 1920x1080P, 60Hz, 10bpc: 144MHz
• DisplayPort ver1.1: DP two lanes or DP one lane
• RGB analog video(VGA port) output: Configured for 700mV voltage swing
• Spread spectrum (de-spreading) for EMI reduction
• EDID Pre-fetch (VGA EDID Conversion)
• An extra VGA connection cable need to connect to your VGA monitor or Projector.
• Measured power: Active 1.4W, Standby 100mW
• Power supply: +3.3V (Form DP) "
• 5.4 Gbps Bandwidth input over 2 lanes
• Intergrated triple 10-bit, 162MHz Video DAC for Analog VGA signal Output