Specifications

ptfe moulded/extruded tube
1.O.D.17mm~500mm
2.inner diameter:7mm-300mm
3.Stretch strength:15Mpa
4.Break elongation 150%

 

 

.PTFE teflon capillary tube

 tube

1). PTFE teflon tube

outer diameter: 0.9~30mm

inter diameter: 0.5~24mm

lenght :<=50m

Property	Unit	SFG-1 target	SFG-2 target
Tensile strength (min)	MPa	≥2	≥15
Elongation at rupture	%	≥100	≥150
exchange exceed voltage ≥KV	Thickness 0.2 0.3 0.4 0.5	Target value 6 8 10 12

 

PTFE (Teflon)

Virgin, or unfilled, PTFE (of which Teflon is a trade name) is widely used due to it's unique combination of properties:

Characteristics:
Outstanding chemical resistance (unmatched by any other plastic)
lowest coefficient of friction of any plastic
superb electrical insulator
high resistance to weathering
wide working temperature range (-180C to +260C)

Typical applications:
Seats
Seals
Insulators
Sleeves and Liners
Bellows
bridge and pipe bearings

Properties (typical):
Colour:  White
Density: 2.22 g/cm3

usage

1.In chemistry industry usa as sealing element,pipeline,pipe fitting and hight pure agentia household utensils ect

2.In machine industry use as piston ring,guide ring, machine tool guideways ect.

3.Electrical and Electronic Engineering use as electric wire,electric cable,electrical condenser film, insulation board ect.

4.In Construction Trades use as bridge,tunnel ahead ,large-scale chemical industry pipeline,storage tank supporting bearing slipper.

5.In light textile and other industry ,because ptfe product have nonstick properties ,it use in spinning,papermaking, foodstuff,rubber,ceramics and so on industry play a mucosa part of sticky or take off 

 

 

we offer above products 

PTFE  teflon moulded /skived sheet

PTFE teflon skived film/tape

PTFE teflon moulded/extruded rod

PTFE teflon moulded/extruded tube

PTFE teflon extruded capillary tube

PTFE teflon gasket sealing material

Filled PTFE teflon  products

PTFE teflon component