paper pulp pot molding machine moulded pulp pot making machine

cess of paper pulp pot molding machine moulded pulp pot making machine

2.MAIN EQUITMENTS of paper pulp pot molding machine moulded pulp pot making machine

Pulping system

Main equipments:pulper  2m3,37kw,1setl;vibration screen 0.9m2,3kw,1set;mixer,2sets;pulp 

pump, water pump, control cabinet etc.

Forming system

Two types of forming machine for option:One is XW2-6650 forming machine,1set;platen size:660×

500mm, with two separated platens; operated by two workers independently; suitable for small scale

production of the products in small size; after forming, the wet products  should be received  manually

from the forming machine and collected to the carts by manual;The molds hould be cleaned by

workers; forming efficiency: 2-5cycles/min.The other is XW-12066Y forming machine,1set;platen size:

at the together;suitable for large scale production of the products in big size. The wet products will be

transferred out and discharged on the carrier automatically and the workers should collect the

products from the carrier to the carts. Mold cleaning system has been equipped. Forming efficiency:

2-4cycles/min.equipped with control cabinet.

Drying system Outline dimension: 28080×2950×3600mm; single layer conveying chain. Heated by

unit and the  temperature of each unit ould be controlled independently;multi burners with French or

Italian  brand.The enery for option: LPG,GAS,diesel oil.Equiped with auto control cabinet.

Hot pressing system

Used press the products after drying; 5sets;  platen size: 600*480mm; power 6KW; with   counter and

safety protection appliance;The pressure and temperature can be adjusted.adopting the gas-liquid

pressurized technology. Equipped with control cabinet.

Subsidiary Equipments

Vacuum pump,  45kw, 1 s et; air compressing system: air compressor (37kw, 1set), air dryer, air filter

and air storage tank.

3.MAIN INTRODUCTION of  paper pulp pot molding machine moulded pulp pot making machine

•Production line occupation:about720m2.Requirement for the workshop:height ≥4.5m,width≥12m,

length≥ 60m.

•Total power for the production line: about 133.2KW. •Workforce for the production line: 9-11people/shift.

•Main parts adopted are with International brand which are reliable in quality and convenient in after sales

service.And  engergy  saving is  the most  distinctive feature of  HGHY eqipments compared with congener

equipments internationally. 

•The supplier will be responsible for the instruction in installation,test running and training.

 Warranty: one year since finishing the installation.

•The equipments equipped in this production line are supposed to the production of  nearly all of the pulp

molded products.The details have been instructed in the quotation.  For further inquiry, please

 feel free to contact us.

4. MAIN CONSUMPTION of paper pulp pot molding machine moulded pulp pot making machine

5.why HGHY is your best choice

- With more than 18 years of expertise and experience, HGHY is one of the earliest manufacturer

  for Pulp Molding Products in China;

- Combined with high and new technologies from science professors of famous university SCUT,

  with R&D personnel over 30 people, HGHY is the most reliable choice to ensure superb

  performance in the long run;

- HGHY offers the widest range of both equipment/machine types and platen/tooling sizes, as well

  as a comprehensive moulds per platen, which meets almost all kinds of need;

- HGHY's factory covers an area of 24,000 square meters, commands more than 60% of the total

  domestic sales, already exported to over 40 countries and areas;

- Excellent engineers, sales and service team brings the best before and after sales service, to

  ensure long-term satisfaction from customer and mutual benefits.