Product Details

Specifications

1.High quality final PET flakes
2.Efficient and energy saving
3.Recycling capacity range is 200-3000kg/h

Product Description

Waste plastic washing line/machine:
1 Belt convey system 1set
2 Crusher 1set (depend on the capacity)
3 Rub and clean machine 1set
4 Film clean machine 1set
5 Screw transporter 1set
6 Film dewater system 1set
7 High speed dewater system 1set
8 stainless steel pipe Dry system 1set
9 Whirlwind material storehouse 1set
10 Electric equipment 1set

ONE. Belt convey system
1. Motor power: 1.5KW
2. Strap width: 600mm
3. Strap transport length: 4000mm
4. Excitation timing

TWO. SWP 800 crusher
1. Motor power: 37KW
2. Crush capability: 400--500KG/H
3. Water spout diameter: 1inch
4. Crush way: Crush with water

THREE. Rub and clean machine
1. Motor power: 5.5 KW
2. Rotation speed: 500RPM
3. Screw diameter: Φ 250
4. Screw barrel length: 3000mm

FOUR. Film clean machine
1. Clean roller: 5PC
2. Width: 1250mm
3. Available length: 6000mm
4. Motor power: 2.2*2
5. Decontamination motor power: 1.5KW
6. Liquid lever control

FIVE. Screw transporter
1. Motor power: 1.5 KW
2. Screw diameter: Φ 200
3. Available length: 2500mm

SIX. Film dewater system
1. Motor power: 45KW
2. Rotation speed: 1400rpm
3. Other parts contacted with material are made of stain steel, such as dehydration barrel, axes, leptospira and so on.

SEVEN. Stainless steel pipe dry system
1. Heat power: 28KW
2. Suction wind machine power: 5.5KW
3. Pipe diameter: Φ 159mm

EIGHT. Whirlwind material storehouse
1. Capacity: 2M3
2. Mixer motor power: 2.2KW

NINE. Electric equipment
1. Use domestic brand (DELIXI electric equipment)

Note that: The specification is competely based on your production purpose. And your capacity per hour. If your fillm is very dirty, we could add a hot washer.

Pre-treatment Unit.	1. All the crudes are treated in this unit. 2. Allow for remove some impurities and flithy things in the raw materials. 3. In order to protect the machine in the next step. 4. Ensure the baled or assembled materials can be disassembled, so that the raw materials can be treated well.
Crushing and Grinding Unit	1. After the pre-treatment, the raw materials can be crushed into small pieces. 2. Equipped with selecting system, in order to make the pieces be qualified. 3. Ensure the raw materials can be washed and cleaned entirely in the next step.
Crushing and Grinding Unit	1. After the pre-treatment, the raw materials can be crushed into small pieces. 2. Equipped with selecting system, in order to make the pieces be qualified. 3. Ensure the raw materials can be washed and cleaned entirely in the next step.
Washing Unit (Cool and Hot Washing Parts)	1. Crushed materials are sent to this unit, usually they will be in the cool washing part. In order to remove some filthy which can disolve in the cool water. 2. In the hot washing part, there are some chemicals in the hot wawter, so that some insoluble filthy will be removed. 3. All the progression can be adjusted, also, with different design in case of different wasted plastic raw material, to ensure the raw materials can be immersed and cleaned totally. 4. Equipped with different washing method in the unnit, such as friction washer and so on.
Drying Unit	1. Follows with the washing unit. 2. Varies of drying method, such as hot air and dewatering machine. 3. To dry the crushed materials, so that the materials can suit for different requirements. 4. Can be adjusted according to different requests.
Collecting Unit	1. To collect the final products, such as flakes, small pieces and so on. 2. Can be linked to different plant of what is plastic rebirthing line.