Specifications

High Tensile Strength Galvanized Steel Wire
1.High tensile strength
2.Good wear resistance
3.Small tolerance

High Tensile Strength Galvanzied Steel Wire

1.Material: 45,65,70, 72A, 72B, 82B, 65Mn
2. Surface Coating: Galvanized
3. Characteristic: High  tensile strength
                               Good wear resistance
                              Small tolerance
 4. Packing type: Spool; Coil

5. Application: Being used for electric cables,telephone cables,armouring cables and so on

6. Remarks during use and handling:
a. During transportation, handle softly and carefully, avoid bumping and damaging the outer packing materials. Moisture and rain prohibited. Steel wires must be stored in dry and well ventilated indoors
b. Pay attention to the direction of steel wires when paying-off. Be sure the spools or coilis rotationg freely as to achieve identical tension of all the steel wires

c.  In case of batch usage, the remaining should be repacked to avoid oxidizing of the surface to guarantee coating    

                   

  Technical parameters
Wire dia: 0.8-1.6mm; Tensile Strength:2060~1570Mpa 

Nominal Diameter	Tolerances of Diameter			Nomina Tensile Strength	Standard
mm	Mpa			Mpa	As per GB,EN,IEC,JIS,ASTM standard,as well as customer's request
0.8	+/-0.01			1770-2060
0.9	+/-0.01			1770-2060
1.0	+/-0.01			1770-2060
1.2	+/-0.02			1770-2060
1.26	+/-0.02			1770-2060
1.4	+/-0.02			1570-1960
1.6	+/-0.02			1570-1960

 NOTE:Providing engineer design as per cstomer's request.

 

 

Factory Picture: