Product Details

More pictures

WANRUN Infrared Carbon Crystal Heating Panel Technology wins every time when choosing a heating solution due to the following reasons..

1. Energy-saving

It can be used together with temperature controller to form infrared carbon crystal heating panel system. According to the temperature needs of the user, the temperature in each room can be freely adjusted. When the indoor temperature reaches the preset temperature, the heating system will automatically stop and the heat accumulator begins to emit heat so as to maintain the preset temperature for a long time, saving energy and power.

2. Environmenal protection

Its energy is electricity so that is very evironmental.

3. Safety and comfortable

It won't explode or emit odor, wind or noist.

4. Long life expectancy

It can be used more than 20 years.

5. Health care

The heat radiant can change body microcirculation, cell organization under skin producing resonance, clearing the barrier of microcirculation, adjusting and balancing nervous system promoting metabolism, increasing body physical power. It is very good for your health.

CE approved Carbon Fiber far Infrared Heating Panel

Infrared panel heater Raw Material:

Carbon fiber heating panels adopt carbon fiber for the main heating elments,which is used in high-tech field for aviation,aerospace,electronics.Take advantage of its conductivity thermal performance;Regard glass fiber reinforced material as the carrier;Make use of a polymer resin to promote curing materials;Produced through high temperature and high pressure pressed.

Features:

1>.Power saving

2>.Low radiation

3>.Large heating area

4>.L ong working life

5>. Environmental protection

6>. Health care physical therapy

7>. Decorative(individual heating panels only)

8>. Safty and reliable

infrared panel heater Function and Characteristics:

1. Heating

Carbon is the basic elements of the carbon fiber.it is a high-performance fibers,with characters like light weight,high strength,good stiffness,high temperature resistance,chemical resistance,anti-fatigue,high thermal conductivity and samll expansion coefficient etc.
Carbon fiber is the best material of thermal conductivity in the non-metal materials.Solid materials mainly depend on the heat transfer of free electrons,while the carbon fiber heat transfer is mainly relying on the lattice vibrations,and its essence is a microscopic particle part of the thermal motion of atoms,ions,it is consistent with the law of motion of quantum mechanics,the hot component via the electron motion electric trigger incentives to produce thermal effects,the whole movement is silent,dull and non-polluting.

2. Energy saving

Radiation is directly heated the human body or the objects indoor. Heat release through the thermal radiation and indoor heated object; All heated objects began to release the thermal energy after cutting off the power. The energy saving is up to 30%.

3. Environmental protection

This product just heat, no redness, non-luminance, no wind, no gas consumption, and eliminate the floating dust , at the same time, stable performance, safe and reliable, it is the ideal indoor heating system.

4. Health care physical therapy

This product is a far infrared ray radiation heat energy, the radiation is 3 ~ 5 cm deep, under this condition, it’s very good for health. Like relax the muscles and stimulate the blood circulation; remove toxins, strengthen the cell vitality, promote the blood circulation, also health care for rheumatoid arthritis, a stomach bug, enteritis, menses, feet corn, synovial infection etc.

5. Beauty

Far infrared ray absorbed by skin, and resonate with subcutaneous tissue, can kill all kinds of bacteria in the skin, enhance the skin elasticity, can remove fine wrinkles.

6. Decorative

The appearance of the infrared heating painting is clear, crisp, elegant and colorful. We have wall hanging type or floor type. You can see them as an art in spring, summer and autumn, while it is a heating panel in winter.

7. Safety and reliable

The carbon heating panel can work once switch on.Products can meet GB7406.23-2003 standard requirements.It has good water resistance,oil resistance and corrosion resistance;It won’t be oxidated and won’t leak. Dielectric strength is more than 3750V,the combustion rating is above class B1.

Use method and the matters needing attention:

(1).Power on and indicator light is on, means it starts to heating.

(2).Under power on, no coverage on the surface, no flammable items on back of heating panel. It is strictly prohibited to use organic solvents to clean the heating panel. (Offenders consequences)

(3).It is prohibited to remove any components or heating plate.

(4).A thermostat is recommended to control the indoor temperature automatically, also avoid energy wasting.

Technical Data

About US

Suzhou wanrun Insulation material Co., Ltd is a privately owned factory focuses on the Engineering epoxy resin sheet and other Insulation Materials.Till now our company is the leading supplier of fr4 insulation sheet and further processing industry chain.With more than decade of produing experience,the company became a respected manufacturer in China. Supplier and Exporter whose product range encompasses Insulation Material and Engineering Plastic. Products details such as glassfiber and epoxy resin sheet&rod&tubes,G10,G11,carbon crystal heating panel,pc sheet,acrylich sheet(PMMA),Teflon(PTFE),Durostone,bakelite,copper-clad laminate sheet,ect.

As our company are commited to providing with best quality,competitive price and timely delivery.In the meantime,we ensure proper function of priduction,packageing,marketing and distribution processes.

Wan-run exsitence in orser to satisfied with our comstomers and in multiple design, shape and size that comform to international standards.We also provide faricaton as well as moulding services,with the aim of "providing best solution to our coustomers".

Wan-run is also procides various sulutions in accrodance to our client's sample or drawing,special need as well.

Our main products passed SGS,CEMT,CTI certificates for ensure the quality is meet the standard.

Our sales advisors will be more than happy to provide advice on material selection and installation.

-- From the WANRUN export trade Team !!

Our Services

As one of the leading manufacturers of insulation material,we put the quality at first. And we will on line for 24 hours for your inquiry.

We have our senior engineers team and introducing the advanced technology and equipment to make products according to costomer drawing ,data ,or samples and so on.
Our company Customized fr4 g10 epoxy resin board can be provided.
CAD or 3D Drawings processing is also accepted

FAQ

1.Q:What about the package of product?

A:1. Wooden pallet with carton. 2. Plastic pallet with carton. 3. Wooden wooden pallet with wooden case. 4. According to customer requirements.

2.Q:What's the payment?

A:30%TT advance , 70% after send the copy of the BL.We accept T/T,L/C, Western Union ,USD.

3.Q:If I need sample,what should I do?

A:It's our pleasure to send sample for you.You can send me your delivery address by email or message.We will send you free sample at first time.

4.How can you deal with quality issues that customer feedback after receiving the goods?

1).Customers take photos of unqualified goods and then our sales staff will send them to Engineering Department to verify.

2) .If the issue is confirmed, our sales staff will explain the root cause and take corrective actions in coming orders.

5.How can you deal with quality issues that customer feedback after receiving the goods?

1) Customers take photos of unqualified goods and then our sales staff will send them to Engineering Department to verify.
2) If the issue is confirmed, our sales staff will explain the root cause and take corrective actions in coming orders.

Please FEEL free to contact us.