Polypropylene Gag Filling and Sealing Machine

1. Main Technical Parameters

Polypropylene bag filling and sealing machine Washing, filling and sealing three stations adopt rotary type. The sealing station uses hot-melt welding to seal cap. The machine uses mechanical hand to catch bottles neck for location and handing-over. Any scrape of bottle or bottom is not allowed.

1,Max capacity:6000 bottles/hour adopt frequency conversion for adjusting speed.

2,Specification: 100-1000ml plastic infusion bottles (BOPP bottle or vertical soft bag) and matching plastic cap (subject to BOPP bottle or vertical soft bag sample provided by buyer)

3,Bottle-air washing number: 30, Water washing number: 30, filling number: 18, Cap-sealing numbers: 30

4,Washing effect: Qualified rate of washing ≥99.8%

5,Metering error: ≤±1%

6,Welding effect: After sealing, the deviation between the position of bottleneck and cap≤0.4mm; cap-sealing pass rate≥99.9%

7,Total power: About 20Kw

8,Gas consumption: 0.6Mpa, about 260 m³ /h

9,Water consumption: Purified water≥0.2MPa, about 0.7 m³ /h

10,Overall dimension: (L×W×H) 4500×2000×2200mm

2. Work principle

Model XGF30/18/30 plastic soft bottle I.V-solution washing, filling and sealing production line is a packing machine contains bottle-washing, filling, and cap-sealing three stations as a whole. Washing, filling and sealing three stations adopt rotary type. The sealing station uses hot-melt welding to seal cap. The machine uses mechanical hand to catch bottles neck for location and handing-over. Any scrape of bottle or bottom is not allowed. This promotes production efficiency and ensures quality.

Technical process: air washing (3shifts)---water washing(2shifts)—dry blowing(1 shift)—filling--sealing

1). Bottle-handing method

Synchronous belt transfers with bottle-blowing manipulator.

2). Bottle air washing part

3) Water washing station

After the air washing, Mechanical hand catches bottles by bottleneck and turn 180°down, making bottleneck facing down for washing. Bottle-washing spray needle is equipped for washing, after washing, there are bottle blowing drying station, ensures inside and outside of the bottles without any water drop.

4). Filling station

5).Cap-sealing station