Pharmaceutical IV Fluid Packing Line for 100 250 500 1000ml
USD $100,000 - $1,500,000 /Set
Min.Order:1 Set
Hunan FE Pharmaceutical Machinery Co., Ltd.
FE IV Solution Production Line
- Non-PVC Soft Bag IV Solution
- PP Bottle IV Solution
- Glass Bottle / Vial IV Solution
- BFS Machine
- Ampoule
- Prefilled Syringe
- Turnkey Project
Pharmaceutical IV Fluid Packing Line for 100 250 500 1000ml
Main Application
Pharmaceutical IV Fluid Packing Line for 100 250 500 1000ml is made by Hunan FE, contains all the most advanced technology with all kinds of patents for producing IV solution.
This IV infusion machine can bring you less leakage rate, bigger film saving(100% film utilization, less bag width), higher LVP quality, lower cost, more stable and reilable running and performance.
It can automatically finish film feeding, printing, film opening, ports feeding, ports heating, bag forming, ports welding, waste edge removing, bag filling, bag sealing, finished infusion outputting etc..
This IV solution production line also works with other equipments such as Super Water Sterilizer, Soft Bag Dryer, Leak Detector, Lamp Checking Machine, Auto Pillow Packing Machines, Auto Carton Sealer etc.
Most Valuable Advantages
100% Utilization of film, most reasonable width of 130mm bag,
only the film cost saving can bring you another production line in a few years.
Special technology to enable less leakage rate within 0.03%.
Main Technical Parameters
Description | Hunan FE Pharmaceutical Non-pvc soft bag IV Fluid Production Line |
Model | SRDY1A/1200,SRDY2A/2500,SRDY3A/3800,SRDY4A/5000,SRDY6A/7500,SRDY12A/15000 |
Production Capacity | 1200-15000BPH |
Specification | 100ml, 250ml, 500ml, 1000ml(Others to be tailored) |
Measurement Tolerance | 100ml≤±1.5%; 250ml≤±1%; 500ml≤±0.7%;(with style of mass flow) |
Bag Film | Non-PVC double-layer film |
Film Thickness | 190±20um(tolerance: max.10%) |
ID of Film Roll | Min.150mm |
Max. OD of Film Roll | Max.600mm |
Bag Form | Single port/ Double ports, hot-sealing |
Printing | Hot foil printing |
CIP/SIP | 125°C-30mins |
Solution Temperature | Max. 50 °C |
Solution Pressure | 2-4kg/cm² |
Compressed Air Pressure | 6Bar(dry/oil less) |
Clean Air Pressure | 4Bar(dry/oil less) |
Cooling Water | 15-20°C |
Noise | max.75dB |
Relative Humidity | max.50% |
Average Humidity | 85% |
Ambient Temperature | max.24°C |
Material | Contact with solution to be ultra-low carbon austenitic S/S, the rest mainly low carbon austenitic S/S |
Production Line
Photographic Process