Specifications

1.Nitrogen filling and stoppering machine
2.Apply for bottle of 50ml,100ml,250ml,500ml
3.Capacity:100-500 bottle/min

NFS nitrogen filling and stoppering machine

Main application

The equipment is suitable for glass IV solution bottle nitrogen filling, automatic stopper adding and stoppering etc.

Performance Characteristics

1.Adopts large capacity electromagnetic hopper,reduce the labor intensity.

2.Vacuum stoppering and mechanical positioning,only when the stoppers is in the accurate place it can go to the stoppering station,high qualified rate.

3.The machine uses the microcomputer frequency modulator to do the frequency speed adjustments.The capacity can be stepless speed regulated within the rated capacity with easy,no noise,safe and reliable characteristics;

4.Equipped with bottle mouth positioning units,good centering.Bottle enters continually,running stable,and high efficiencies.

5.Screw of bottle adopts mobile structure,can easily replace different screws by only removing and installing 2 M8 × 25 bolts,easy to switch among infusion bottles of different specifications.

6.Before stoppering there are nitrogen filling station,do the stoppering immediately after filling nitrogen,can meet the requirements of the nitrogen filling products.

Main Technical Parameter

Model	NFS10	NFS20	NFS24A
Applicable size	50ml,100ml,250ml,500ml		50ml,100ml,250ml
Capacity	100-200 bottle/min	200-450 bottle/min	200-500 bottle/min
Nitrogen filling heads	10	20	24
Stoppering heads	10	20	24
Electric capacity	4.0KW	4.0KW	4.0KW
Outer dimension(mm)	2800X1100X1750	2800X1350X1750	2800X1350X1750

Note:

In the above table,the capacity is inversely proportional to the bottle size,that is the size much bigger the capacity is much lower,the specific is correct based on the tender documents.