Specifications

1.Filling,nitrogen filling and stoppering machine
2.Apply for bottle of 50ml,100ml,250ml,500ml
3.Capacity:60-500 bottle/min

 

Main application

CNGFS filling,nitrogen filling and stoppering machine can be used for glucose,antibiotics and other fluids at filling,nitrogen filling and stoppering in room temperature and high temperature,it can also be used for filling,nitrogen filling and stoppering for amino acids,fat emulsion,oral liquid,nutrition liquid and biological agents.

Performance Characteristics

1.The filling parts adopts the Germany GEMU valve filling,high accurate,can achieve no bottle no filling.

2.During filling process,no mandatory friction of mechanical parts,not produce particulate pollution,in line with GMP requirements.

3.Adopts the quick equipped filling head design,the filling heads is easy in disassembly and assembly(Only need to loose the two M6 bolts )

4.Use sensitive level gauge in the filling barrel,and make the level gauge away from the liquid inlet,to ensure the inlet tube when no effect on the level gauge when filling liquid.The rotation speed of the machine is low,running smooth and stable,thus ensuring smooth liquid level in the filling barrel and ensures the stability of the filling pressure;

5.Easy operation,all settings can be set directly from man-machine interface.Electronic control system adopts advanced PLC technology and microcomputer tuner to adjust speed.Start and stop smooth,easy for changing specification parts.  

6.With the CIP/SIP units,easy for cleaning and adjustments,after filling can thoroughly do the cleaning and disinfecting work.

7.By vacuum stoppering and mechanical positioning,only when the stoppers is in the accurate place it can go to the stoppering station,high qualified rate.

8.Screw of bottle adopts mobile structure,can easily replace different screws by only removing and installing 2 M8 × 25 bolts,easy to switch among infusion bottles of different specifications.

9.Fill nitrogen immediately after filling,and stopper the corks immediately after filling nitrogen,reducing possible pollution caused by long-distance delivery.

10.There is nitrogen protection in the delivering dial wheel between the wheel of the nitrogen filling and the wheel of the stoppering station.The nitrogen filling adopts the insert bottle filling methods;maximum ensures residual oxygen of the nitrogen filling products.

Main Technical Parameter

Model	CNGFS16/10	CNGFS24/10	CNGFS36/20	CNGFS48/20
Applicable size	50ml,100ml,250ml,500ml
Capacity	60-150 bottle/min	120-250 bottle/min	200-350 bottle/min	350-500 bottle/min
Filling heads	12	20	26	30
Nitrogen filling heads	10	10	20	20
Stoppering heads	10	10	20	20
Metering error	±1.5%(standard container)
Electric capacity	4.0KW	4.0KW	4.0KW	4.0KW
Compressed air consumption	1.5m³/h(0.6MPa)	2.0m³/h(0.6MPa)	3.2m³/h(0.6MPa)	4.5m³/h(0.6MPa)
Outer dimension(mm)	2500X1250X2350	2350X1520X2350	3150X1900X2350	3500X2350X2350

Note:

In the above table, the capacity is inversely proportional to the bottle size, that is the size much bigger the capacity is much lower, the specific is correct based on the tender documents.