Product Details

Non PVC IV Soft Bag Infusion Form-Fill-Seal Machine

Main Application

Non PVC IV Soft Bag Infusion Form-Fill-Seal Machine is made by Hunan FE, which contains all the most advanced technology with all kinds of patents.

It can bring you less leakage rate, bigger film saving, higher LVP quality, lower cost, more stable and reilable running and performance.

It can automatically finish film feeding, printing, film opening, ports feeding, ports heating, bag forming, ports welding, waste edge removing, bag filling, bag sealing, finished infusion outputting etc..

This production line also works with other equipments such as Super Water Sterilizer, Soft Bag Dryer, Leak Detector, Lamp Checking Machine, Auto Pillow Packing Machines, Auto Carton Sealer etc.

Most Valuable Advantages

100% Utilization of film, most reasonable width of 130mm bag,

only the film cost saving can bring you another production line in a few years.

Special technology to enable less leakage rate within 0.03%.

Main Technical Parameters

Description	Non PVC IV Soft Bag Infusion Form-Fill-Seal Machine
Model	SRDY1A/1200,SRDY2A/2500,SRDY3A/3800,SRDY4A/5000,SRDY6A/7500,SRDY12A/15000
Production Capacity	1200-15000BPH
Specification	100ml, 250ml, 500ml, 1000ml(Others to be tailored)
Measurement Tolerance	100ml≤±1.5%; 250ml≤±1%; 500ml≤±0.7%;(with style of mass flow)
Bag Film	Non-PVC double-layer film
Film Thickness	190±20um(tolerance: max.10%)
ID of Film Roll	Min.150mm
Max. OD of Film Roll	Max.600mm
Bag Form	Single port/ Double ports, hot-sealing
Printing	Hot foil printing
CIP/SIP	125°C-30mins
Solution Temperature	Max. 50 °C
Solution Pressure	2-4kg/cm²
Compressed Air Pressure	6Bar(dry/oil less)
Clean Air Pressure	4Bar(dry/oil less)
Cooling Water	15-20°C
Noise	max.75dB
Relative Humidity	max.50%
Average Humidity	85%
Ambient Temperature	max.24°C
Material	Contact with solution to be ultra-low carbon austenitic S/S, the rest mainly low carbon austenitic S/S

Photographic Process