bolt cold heading machine
USD $5,000 - $200,000 /Set
Min.Order:1 Set
Beijing Ron-En Machinery & Integration Co., Ltd.
Welcome to visit our company! Bolts making machine.
The composition of the production line is cold heading machine head forming machine( edge-trimming machine) and thread rolling machine. Our company is professional to manufacture cold heading machine head forming machine( edge-trimming machine) and thread rolling machine. The technology of our machine is mature. The stability of our machine is good and the quality of our products is high. The type of our machine is complete. Our machine can product bolt nut rivet pin and so on.
Our machine can manufacture all kinds of heads products and the diameter of bars is 4-30mm.
Advantage
High automation | 2 machines are operated by 1 person only. |
High utilization | The entire brass rod(Φ15- Φ30) can be put into the machine. |
High productivity | The production rate is 30-100 pcs/min.(depend on the product's size). It is 5 times higher than the normal machines. |
High passing rate | >98%(the traditional one has 90% only) |
Safety | High safety performance, no work injuries. |
Low production cost | (1)Gas and electric motor are used as fire heating. (2)Medium frequency furnace(60-100) and electric motor are used as intermediate frequency heating. (3)30% of the electric power can be saved. |
Customization | Customization is available. |
Trimming | Products are without trimming (no unwanted material on the product). |
Application Field
For the production parts: copper core, flare nut, valves, plumbing fittings, brass nuts, screw nuts, valve element, connector, single connector, internal thread and so on.
The technical parameter
1.Technical parameter of nuts cold heading machine (6 stations)
Model | 11B | 14B | 17B | 19B | 24B | 28B | 33B |
Station no. | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
Forging force ton | 60 | 95 | 120 | 150 | 250 | 300 | 400 |
Max.cutting diameter mm | 11 | 16 | 18 | 20 | 24 | 27 | 32 |
Max.cutting length mm | 6-28 | 11-35 | 13-40 | 15-50 | 20-50 | 21-55 | 25-65 |
Max.speed pcs/min | 200 | 200 | 180 | 170 | 120 | 120 | 80 |
Main slide stroke mm | 50 | 70 | 80 | 100 | 110 | 110 | 200 |
Die pitch mm | 50 | 60 | 70 | 80 | 100 | 100 | 100 |
Main motor hp | 11 | 20 | 30 | 50 | 75 | 75 | 100 |
Air press kg | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 |
Specification | M4-M6 | M8-M10 | M8-M10 | M10-M12 | M12-M16 | M12-M18 | M16-M22 |
Lubrication | 1 | 1 | 2 | 2 | 2 | 2 | 3 |
Weight ton | 6 | 8.5 | 10 | 17 | 23 | 25 | 38 |
Machine size m | 2.3*1.55*1.2 | 2.8*2.05*1.3 | 3.67*2.0*1.4 | 4*2.45*1.45 | 5*3*1.7 | 5*3*1.7 | 6*3.2*1.8 |
2.Technical parameter of head forming machine (edge-trimming machine)
3.Threa rolling machine
Type No | Thread rolling | Productivety(pc/min) | Motor power | Machine weight(kg) | Out form size |
Z25-4 | M2-M4 | 110 | 1.1kw | 300 | 1100*700*1000 |
Z25-6 | M4-M6 | 90 | 1.5kw | 400 | 1300*800*1100 |
Z25-8 | M6-M8 | 60 | 3kw | 600 | 1500*1100*1400 |
Z25-10 | M6-M10 | 55 | 4kw | 800 | 1600*1100*1450 |
Z25-12 | M6-M12 | 50 | 5.5kw | 900 | 2000*1200*1500 |
Z25-16 | M8-M16 | 45 | 7.5kw | 1500 | 2500*1000*1500 |
Z25-20 | M14-M20 | 35 | 11kw | 3500 | 3000*1300*1800 |
Z25-24 | M14-M27 | 35 | 15kw | 5000 | 3500*1400*1800 |
Finished Products:
Configuration of cold heading machine
standard straightening mechanism | 1 set |
standard feeding mechanism | 1 set |
standard cutting mechanism | 1 set |
standard clamp mechanism | 1 set |
standard model device | 1 set |
standard punching device | 1 set |
standard lubrication system | 1 set |
standard flywheel shield | 1 set |
standard handing stools | 1 set |
standard wire rack | 1 set |
standard electrical cabinet | 1 set |
standard spare parts | 1 set |
bed | QT500-8 |
main slider | QT500-8 |
crankshaft | 42CrMoforging(high frequency processing) |
master die | Cr12MoV forging |
main link | ZG45 |
cutting block | Cr12MoV forging |
all copper tile and copper tube | ZCuSn10Pb1 |
bearing | NSK |
all electrical components | SIEMENS OR Schneider |
pump | TaiWan WeiLing |
main motor | Jiangsu World |
Finished bolt performace grade
1. Low-carbon steel ----- cold heading machine ---bolt performance grade is 4.8 grade( tensile strength is 400MPa Yield Strength is 320MPa)
dium-carbon steel----cold heading machine---- bolt performance grade is 6.8 grade( tensile strength is 600MPa/ Yield Strength is 320MPa)---- Heat Treatment --- bolt performance grade is 8.8 grade
3.high-carbon steel ----cold heading machine----bolt performance grade is 8.8 grade ( tensile strength is 800MPa/ Yield Strength is 640MPa)----- Heat Treatment----- bolt performance grade is 10.9-12.9 grade( tensile strength is 1000MPa/1200MPa Yield Strength is 900MPa/1080MPa)
Shipping pictures:
1.Q: How to sure the quality of our machine ?
A:Our technical of our machine is mature and the quality is examined in actual production
ur products passed the SGS, CE, ISO certifications.
2.Q: What after sales service we can provide
A: We warrant 12 months and provide technical services and technical staff training.
3.Q: Can you provide invitation letter for me if I want to visit your factory?
A: Sure, you can offer us your company information, visit people’s information, visit time, etc., and when we will submit them to our local government for the application.
1)Installation and commissioning
Machine to be installed and commissioned by our technicians.The seller will send our engineer to install the machine accordingly if the buyer need.The buyer have to pay the salary US$ 50-100 per day, and the air ticket, accommodation, eating and some related
fees should be your responsibility
2)Guarantee
Except the wearing parts, 12 months guarantee for machine and 6 months guarantee for electric appliance after shipment. During guarantee time, if the parts were broken caused by the product problem, seller will offer the parts by free. If the parts were broken caused by the mishandling by buyer, buyer needs to buy the parts from seller
Contact: