Smart swimming pool automatic vacuum cleaning robot

The(with remote control) automatic swimming pool cleaner is a new type of highly efficient and energy-saving swimming pool cleaning robot. Through its advanced computer controlled program, it can clean the pool walls and bottom automatically. At the same time, it filters the pool water and gets rid of suspended particles.

Rated input voltage: 110(120)VAC / 220(230)VAC
Frequency: 50Hz/60Hz
Output Voltage: DC 24V
Rated input power: 200W

Rated output power: 150W
Frequency of remote control: 2.4G
Cable length: 20m/30m/40m (Base on different models)
Cleaning band width: 358mm
Filtering capacity: 15m³/h
Filtering capability: 400µm (400µm filter bags are suggested to be used at the beginning of the season), Optional: 100µm /200µm
Water temperature of use: 10°C - 32°C
Creeping speed: 12m/min
IP Grade: cleaner-IP68; power supply unit-IPX4
Working temperature: 10°C - 40°C
Weight of cleaner: 9.5kg (without cable)

Operation of control remote(RC if you have):

Operation of RC A:

1) Power on: Press "ON" (Fig.7-1-8), cleaner switch into standby mode.
2) Power off: The cleaner will stop working after pressing "OFF" at any mode.
3) FWD by manu mode: Firstly, switch into standby mode by following step (1), then press FWD (Fig.7-1-7) and the cleaner will move forward.
4) REW by manu mode: Firstly, switch into standby mode by following step (1), then press REW (Fig.7-1-4) and the cleaner will move reward.
5) 3h AUTO mode: Firstly, switch into standby mode by following step (1), then press AUTO/3h (Fig.7-1-6) and the cleaner will work in 3h AUTO mode.
6) 5h AUTO mode: Firstly, switch into standby mode by following step (1), then press AUTO/5H (Fig.7-1-3) and the cleaner will work in/ switch into 5h AUTO working mode.

Operation of RC B:

1)Automatic working: Press AUTO 1H,AUTO 2H, AUTO 3H or AUTO 4H into automatic working for 1h, 2h, 3h or 4h;
2)Manual forward: Press “AVT” (Fig.7-2-7) to move forward;
3)Manual backward: Press “ARR” (Fig.7-2-4) to move backward;
4)Power off: Press “ARRET” to stop the cleaner in any mode.

Works after use cleaner:
Removing Cleaner from Pool
The cleaner will power off automatically after one cleaning cycle. Unplug the power cable, pull the cable line slightly and lift the cleaner by carrying the stationary ring on the lock nut .
Note:
1) In order not to scratch the pool wall or damage the cleaner, avoid the cleaner touching the pool wall during carrying out from pool.
2) Before carrying outside from pool, suspend the cleaner above water for about 10-15 seconds to release the water remaining inside the cleaner.
3) To carry out the cleaner from pool, please hold the top handle only, never pull cable .
4)Put the cleaner on the edge of pool, open the lock nut, and remove the top cover. Then take out the filter cartridge and take off the filter bags.

Established in 2011, Palicy Co., Ltd is a professional manufacture and exporter that is concerned with the design, development and production of Sauna steam and swimming pool equipments. Including Sauna room, sauna heater, steam room, steam generator, sauna accessories, Aboveground pool, pool ladder, floaing lane, grating tile, LED underwater lights, SPA heater and so on. We are located in Baiyun disctrict, Guangzhou city, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.