Fiberglass Water Treatment Equipment de Swimming Pool Silica Sand Filter
The winding of fibreglass around the filter body makes the filter more durable, deforming-proof, and resistance to chemical and corrosives. Uniquely designed distribution make a stable and even water flow to improve drainage system. All sand filters with pressure gauge. Easy to install, maintenance free.
Side-mount Sand Filter Specifications:
| Model | Tank Dia(mm) | Valve Size(mm) | Filter Area(m2) | Design Flow(m3/h) | Silica Sand(kg) | Height(mm) |
| QS450 | 455 | 40 | 0.16 | 8.0 | 28 | 730 |
| QS500 | 535 | 40 | 0.22 | 11.5 | 50 | 770 |
| QS650 | 635 | 40 | 0.33 | 16.6 | 80 | 850 |
| QS700 | 710 | 40 | 0.38 | 19.2 | 160 | 960 |
| QS800 | 820 | 50 | 0.50 | 25.2 | 220 | 1050 |
| QS900 | 920 | 50 | 0.64 | 30.0 | 370 | 1180 |
| QS1000 | 1020 | 50 | 0.79 | 34.0 | 447 | 1220 |
| QS1200 | 1220 | 50 | 1.13 | 42.0 | 700 | 1410 |
Top-mount Sand Filter Specifications:
| Model | Tank Dia(mm) | Valve Size(mm) | Filter Area(m2) | Design Flow(m3/h) | Silica Sand(kg) | Height(mm) |
| Q400 | 400 | 40 | 0.13 | 6.30 | 28 | 740 |
| Q450 | 450 | 40 | 0.16 | 8.00 | 50 | 800 |
| Q500 | 500 | 40 | 0.22 | 11.5 | 80 | 840 |
| Q650 | 650 | 40 | 0.33 | 16.5 | 160 | 960 |
| Q700 | 700 | 40 | 0.38 | 19.2 | 220 | 1025 |
| Q800 | 800 | 50 | 0.50 | 25.2 | 370 | 1200 |
| Q900 | 900 | 50 | 0.64 | 30.0 | 447 | 1300 |
| Q1000 | 1000 | 50 | 0.79 | 34.0 | 700 | 1400 |
| Q1100 | 1100 | 50 | 0.95 | 38.0 | 900 | 1480 |
| Q1200 | 1200 | 50 | 1.13 | 42.0 | 1100 | 1600 |
Flange type Large Sand Filter Specifications:
| Model | Tank Dia(mm) | Valve Size(mm) | Filter Area(m2) | Design Flow(m3/h) | Silica Sand(kg) | Height(mm) |
| Q1400 | 1400 | 100 | 1.54 | 78 | 1760 | 1580 |
| Q1600 | 1600 | 100 | 2.00 | 102 | 2450 | 1700 |
| Q1800 | 1800 | 150 | 2.54 | 126 | 3100 | 1850 |
| Q2000 | 2000 | 150 | 3.14 | 159 | 3800 | 2000 |
| Q2350 | 2350 | 200 | 4.35 | 201 | 5275 | 2350 |
| Q2500 | 2500 | 200 | 4.91 | 235 | 5950 | 2600 |
| Q3000 | 3000 | 200 | 7.06 | 350 | 8600 | 2650 |
Sand Filter Features:
*Twin heavy duty UV protected fiberglass tank.
*Ergonomically designed six position multiport.
*Resistant to chemicals and corrosion.
*Virtually maintenance free, simply backwash filter when required.
*Sand drain plug for easier sand removal-replacement.
*Maximum working pressure: 2.5kg/cm2 (35psi).
*Maximum temperature: 50 ℃ (122F).
*Working pressure of 4kg/cm2 available by special order.
Installation Intruduction:
Only simple tools (screwdriver and wrenches), plus pipe sealant for plastic adapters, are required to install and service the filter.
1. The filter should be placed on a level concrete slab, very firm ground, or equivalent. Position the filter so that the piping connections, control valve are convenient and accessible for operation and service.
2. Loading the sand media. Filter sand media is load through the top opening of the filter.
- Loosen flange clamp and remove filter control valve (is previously installed).
- Cap internal pipe with plastic cap to prevent sand from entering it.
- We recomment filter tank approximately 1/2 way with water to provide a cushion when the filter sand is poured in. This helps protect the under-drain laterals from excessive shock.
- Carefully pour in correct amount and grade of filter sand. (Be sure center pipe remains centered in opening.) Sand surface should be leveled and should come to about the middle of the filter tank. Remove plastic cap from internal pipe.
3. Assemble filter control valve to filter tank.
- Insert filter control valve (with O'Ring in place) into the tank neck, taking care that the center pipe slips into the hole in the bottom of the valve.
- Place two plastic clamps around valve flange and tank flange and tighten just enough so that the valve may be rotatedon tank for final positioning.
- Carefully screw pressure gauge (with O'Ring in place) into tapped hole in valve body. Do not over tighten.
- Connect pump to control valve opening marked PUMP. After connections are made, tighten valve flange clamps with screwdriver, tapping around clamp with screwdriver handle to help seat valve flange clamp.
Sand filter type: top-mount,side-mount,filter with pump,large filter
Size: -top mount filter:dia 400mm-1200mm(ST-S)
-side mount filter: dia 525mm-1200mm(SG-S)
-large filter: dia 1400mm-2000mm
swimming pool filter
Automatic Intergrative Swimming Pool Filter
Package: The Fibreglass / Stainless Steel Swimming Pool Silica Sand Filter will be packed with carton or plastic film and wood frame.
Delivery Detail: About 8 days for sample; 15-25 days for order, depend on the situation.
Shipping Method: The Fibreglass / Stainless Steel Swimming Pool Silica Sand Filter will be shipping by air,by sea,by express,by logistic.
pool sand filter
Established in 2011, Palicy Co., Ltd is a professional manufacture and exporter that is concerned with the design, development and production of Sauna steam and swimming pool equipments. Including Sauna room, sauna heater, steam room, steam generator, sauna accessories, Aboveground pool, pool ladder, floaing lane, grating tile, LED underwater lights, SPA heater and so on. We are located in Baiyun disctrict, Guangzhou city, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
If you have any questions, pls don't hesitate to email us: Our working time is 9:00-18:00 [Beijing Time].
Look forward to your enquiry!
swimming pool silica sand filter