Product Details

Guangzhou Factory Durable Side-mount Fibreglass Swimming Pool Quartz Sand Filter

Product Description

The winding of fibreglass around the filter body makes the filter more durable, deforming-proof, and resistance to chemical and corrosives. Uniquely designed distribution make a stable and even water flow to improve drainage system. All sand filters with pressure gauge. Easy to install, maintenance free.

Sand Filter Features:

*Twin heavy duty UV protected fiberglass tank.

*Ergonomically designed six position multiport.

*Resistant to chemicals and corrosion.

*Virtually maintenance free, simply backwash filter when required.

*Sand drain plug for easier sand removal-replacement.

*Maximum working pressure: 2.5kg/cm2 (35psi).

*Maximum temperature: 50 ℃ (122F).

*Working pressure of 4kg/cm2 available by special order.

Sand Filter Specifications:

Model	Tank Dia(mm)	Valve Size(mm)	Filter Area(m2)	Design Flow(m3/h)	Silica Sand(kg)	Height(mm)
Q400	400	40	0.13	6.30	28	740
Q450	450	40	0.16	8.00	50	800
Q500	500	40	0.22	11.5	80	840
Q650	650	40	0.33	16.5	160	960
Q700	700	40	0.38	19.2	220	1025
Q800	800	50	0.50	25.2	370	1200
Q900	900	50	0.64	30.0	447	1300
Q1000	1000	50	0.79	34.0	700	1400
Q1100	1100	50	0.95	38.0	900	1480
Q1200	1200	50	1.13	42.0	1100	1600

Installation Intruduction:

Only simple tools (screwdriver and wrenches), plus pipe sealant for plastic adapters, are required to install and service the filter.

1. The filter should be placed on a level concrete slab, very firm ground, or equivalent. Position the filter so that the piping connections, control valve are convenient and accessible for operation and service.

2. Loading the sand media. Filter sand media is load through the top opening of the filter.

Loosen flange clamp and remove filter control valve (is previously installed).
Cap internal pipe with plastic cap to prevent sand from entering it.
We recomment filter tank approximately 1/2 way with water to provide a cushion when the filter sand is poured in. This helps protect the under-drain laterals from excessive shock.
Carefully pour in correct amount and grade of filter sand. (Be sure center pipe remains centered in opening.) Sand surface should be leveled and should come to about the middle of the filter tank. Remove plastic cap from internal pipe.

3. Assemble filter control valve to filter tank.

Insert filter control valve (with O'Ring in place) into the tank neck, taking care that the center pipe slips into the hole in the bottom of the valve.
Place two plastic clamps around valve flange and tank flange and tighten just enough so that the valve may be rotatedon tank for final positioning.
Carefully screw pressure gauge (with O'Ring in place) into tapped hole in valve body. Do not over tighten.
Connect pump to control valve opening marked PUMP. After connections are made, tighten valve flange clamps with screwdriver, tapping around clamp with screwdriver handle to help seat valve flange clamp.

Production Flow

Sand filter type: top-mount, side-mount, filter with pump, large filter

Size: -top mount filter:dia 400mm-1200mm(ST-S)

-side mount filter: dia 525mm-1200mm(SG-S)

-large filter: dia 1400mm-2000mm

quartz sand filter