Product Details

Specifications

Brick Making Machine VSI New Sand Making Machine
1.Smoothness of operation
2.Low working noise
3.High efficiency

Brick Making Machine VSI New Sand Making Machine

Brieft Introduction of Brick Making Machine VSI New Sand Making Machine

VSI New Sand Making Machine is a newly researched equipment, with international advanced level. Technology and modern processing equipment make it a leading role in this industry. VSI Sand Making Machine is widely used for artificial sand, in metal and non-metal ores, cement, refractory material, bauxite, silicon carbide, glass material, building material.

Features of Brick Making Machine VSI New Sand Making Machine :

1. Advanced double-pump oil lubrication system guarantee shaft bearing lower temperature increase, longer life time, more reliable operation.
2. Main shaft is equipped with imported precision rolling bearing. It makes main shaft work stable, lengthen maintenance cycle, increases productivity.
3. Hydraulic lifting mechanism of upper cover can move away the cover easily, which saves man power during maintenance.
4. Over-vibration device is equipped. There will be alarm when vibration surpasses a stipulated figure. It will stop the machine, in order to protect it.
5. Special dust-proof design for main shaft bearing fully avoid dust entering bearing lubrication part, which make sure the machine work normally.
6. Special feed opening structure makes it possible that center feeding and ring feeding comes together, in order to meet requirement of different stones. In addition, this equipment can not only crush stone, but also iron.
7. Shape of material-through device is better designed, which improve the utilization ratio.

Working Principle of Brick Making Machine VSI New Sand Making Machine :

1. Center Feeding:
Raw material falls down into feed hopper, then enters impellor through central entrance hole. It is accelerated in high-speed impellor, then is thrown out at speed of 60-75m/s. When hitting impact plate, it is crushed. Final products come downwards though outlet.

2. Ring Feeding:
Raw material falls down into feed hopper, then through ring, it is devided into two parts by material-dividing plate. One enters into impellor through the center of material-dividing plate. The other falls down from outside of material-dividing plate. Material, which is thrown out by impellor at speed of 60-75m/s, hits material coming down from outside of material-dividing plate. In this way, material is crushed.

Technical Data of Brick Making Machine VSI New Sand Making Machine :

Model			VSI7611	VSI8518	VSI9526	VSI1140
Capacity (t/h)	Center and Ring feeding		120-180	200-260	300-380	450-520
	Center feeding		60-90	100-130	150-190	225-260
Max Feed Size (mm)	Soft material		<35	<40	<45	<50
	Hard material		<30	<35	<40	<45
Rotation speed (r/min)			1700-1890	1520-1690	1360-1510	1180-1310
Power for double motor (kW)			110-150	180-220	264-320	400-440
Overall Dimension L×W×H (mm)			3700×2150×2100	4140×2280×2425	4560×2447×2778	5000×2700×3300
Weight (t)			11.8	14.5	17.8	25.6
Power Source			380v 50Hz
Vibrating Sensor			Inspect scope: 0.1-20mm/s adjusted continuously
Lubrication hydraulic pressure station		Power for double oil pump	2×0.31kW
		Safety	To make sure the supply of the oil with double oil pump; stop working without oil or hydraulic pressure; temperature falls when the water cools; start the motor by heating it in winter.
		Power for oil box heater	2 kW

Brick Making Machine VSI New Sand Making Machine