Specifications

QT5-15 brick machine
1.ISO9001:2008, CE, SGS
2.easy to operate the machine
3.good after sale service
4.low investment

 

QT5-15  brick machine

 

vibration mode: table and mould vibration 
frequency:5000 times / min 
molding cycle:15-22 sec / one time 
main motor power:33 kw

 

Features of QT5-15 brick machine:

1. This machine adopt the advanced vibration control system.. The forming can be completed in seconds with large pressure and solid density. 

 

2.It’s pallet saving.Only ten pieces of supporting plates can be piled.

 

3.As the advanced hydraulic ratio control technology is adopted so that the oil pressure of each branch of the circuit can be controled at will and various bricks with the same high quality can be produced using different raw materials. 

 

4.PLC intelligent control system which equiped with data input and output device,advanced safety logic and fault self-diagnosis system is adopted in full of the production procedure. 

 

Main technical specefications of  QT5-15 brick machine:

QT5-15 brick machine main technical parameters
Molding time	15-20 seconds
Power	32.95kw
Main vibration form	Platefrom vibration
Vibrating frequency	5000rolls/minute
Rated pressure	18MPa
Voltage	Adapt to local voltage
Overall dimensions	3390x2400x4000mm
Weight	About 6T
Raw material	crushed stone, sand, cement, dust and coal fly ash, cinder,  slag, gangue, gravel, perlite, gypsum,and otherindustrial wastes.
Applied products	concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping  products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.

 

 

Productivity of the QT5-15 brick machine:

	Size(mm)	Pcs/mould	Pcs/hour	Pcs/day(10hr)
Hollow block	390x190x190	5	900	9000
Porous brick	240x115x90	16	3500	35000
Solid brick	240x115x53	34	6800	68000
Color brick	200x100x60	20	3600	36000
any normal size any color block ,brick,pavers