FORMALDEHYDELESS NON-IRON FINISHING RESIN RG-220B Fixapret F-ECO manufacturer Factory direct sale
USD $1.00 - $1.00 /Kilogram
Min.Order:1000 Kilograms
Weifang Ruiguang Chemical Co., Ltd.
Textile Finishing Treatment Agent RG-NA200 same as Fixapret NF manufacturer Factory direct sale
FINISHING RESIN RG-NA200 Textiles Anti wrinkle Resin Factory direct sale
NON-IRON FINISHING RESIN RG-NA200 Textiles Anti wrinkle Resin Factory direct sale
High Quality FORMALDEHYDELESS NON-IRON FINISHING RESIN RG-NB273
High Quality FORMALDEHYDELESS NON-IRON FINISHING RESIN RG-NB273
FORMALDEHYDELESS NON-IRON
FINISHING RESIN RG-220B Same as BASF Fixapret F-ECO
Main Ingredient: Modified DMDHEU
Physical and Chemical Indicators:
Appearance:Clear and light yellow solution
Ionicity:Nonionic
PH Value: 4.0-5.5
Effective content: 60-62%
Solid content: 55-58%
Solubility: Infinite dilution with cold water
Performance characteristics and Application:
Cross-linking agent of textile wash and wear non-iron finishing, mainly applied in wrinkle and shrink resistant finish of cotton, viscose and its blended fabric or knitted fabric. Or can applied in embossing, lightning, calendering and bubbling.
Fabric finished by this product has a good non-iron property, very high hydrophytic ability, very good chlorine resistance, durable for water cleaning and dry washing, with good hand feeling.
This product is environmental, textile finished by this product is free of formaldehyde.
Index and property of RG-NA200 are both compared with BASF NF (Fixapret NF).
Catalyzer and dosage: Make Magnesium chloride as (MgCl2·6H2O) catalyzer, its dosage is 10% of resin dosage, but not less than 8g/L, not more than 15g/L.
Reference recipe:
Shirt fabric(full cotton woven fabric):
60-120 g/L RG-NB273
8-12 g/L catalyzer
0.6-1.1 g/L citric acid
1-3 g/L Penetrating agent RG-JFC
20-30 g/L Strength protection improver RG-YL25
10-30 g/L Softener RG-QD30
mangle expression: about 70%
Prebaking:factory regular technology, baking to remained
Moisture content is about 5-8%.
Baking: 150ºC,3 minutes, or 170ºC, 30 seconds.
viscose fabric (Artificial cotton shirt fabric):
120-180 g/L RG-NB273
10-15 g/L catalyzer
0.6-1.1 g/L citric acid
1-3 g/L Penetrating agent RG-JFC
20-30 g/L strength protection improver RG-YL25
10-20 g/L softener RG-QD30
mangle expression: about 80%
Prebaking:factory regular technology, baking to remained
Moisture content is about 5-8%.
Baking:170-175ºC , about 30 seconds
Garment fabric(full cotton knitted fabric):
40-80 g/L RG-NB273
8-10 g/L catalyzer
0.6-1.1 g/L citric acid
1-3 g/L Penetrating agent RG-JFC
20-30 g/L strength protection improver RG-YL25
10-20 g/L softener RG-QD30
mangle expression:about 70%
Prebaking:factory regular technology
Baking: 170ºC , about 30 seconds.
Specified technology should be appropriate adjusted according to test, suggest make necessary test before use, especially for white or light color fabric treatment, it is more necessary.
Notes:
1,Before using pls stir evenly, pls sealed the balance materials after
weighing and taking materials.
2,If stored in a higher temperature, the appearance would the trend
Of yellow, but will not affect the product effective and usage. It
should be used up once opened the drum. If didn’t use up, then
must seal it.
3,In rare cases, this product maybe there is small amount of
crystal separated out. But if increase the temperature or
add water and stir, the crystal can be dissolved.