Specifications

HEPA Filter,Deep-pleat high efficiency filter
With Aluminium separator
Aluminium/MDF/galvanized steel frame available

Fiberglass mini-pleat HEPA filter

 

 

Application:It is applied to the FFU, cleaning equipment,

blow of the cleanroom. And also be widely used in the

electronic, semiconductor, hospital and food industry.

Type: high efficiency foldaway filter

Frame: aluminum or galvanized frame

Separation material: hot melt

Media: fiber glass filter paper

Final resistance: (suggested)600Pa

Max. air flow: 125% of the rated air flow

Temp. resistance: 80°C

Humidity:≤80%RH

 

 

Common Applications: Filtering 0.3 microns or less suspended particles in the air, it is widely used in the terminal filtration of the civil or industrial cleaner places requiring a higher degree of cleanliness such as electronics, semiconductor, precision machinery, pharmaceuticals, hospitals, food etc.

 

Features: Adopting the superfine fiberglass filter paper as the media, separated by hot melt adhesive and fiberglass thread, sealed by the new polyurethane sealant, aluminum alloy frame with combined spray protection network both in the outlet and inlet side to protect filter paper. Low loss, high efficiency, light weight, it is tested precisely one by one.
Frame: Aluminum
Temperature resistance: 80 °C

 

 

(Specification):

 

Type	Dimensions W*H*D (mm)	Filter Area (m2)	Resistance at the speed of 0.45m/s			Recommended Airflow (m3/h)
			H13	H14	H15
SHW-HW	610*610*50	7.0	145	160	180	600-1000
	305*305*70	2.5	120	135	160	100-250
	305*610*70	5.0	120	135	160	300-500
	610*610*70	10.2	120	135	160	600-1000
	915*610*70	15.4	120	135	160	900-1500
	305*610*90	6.5	85	100	120	300-500
	610*610*90	13.1	85	100	120	600-1000
	915*610*90	19.7	85	100	120	900-1500
	1220*610*90	26.5	85	100	120	1200-2000

 

Note: Other specifications are available on request

1. The wind speed of unidirectional flow clean system is generally less than 0.45m / s and the inlet side is 0.45m / s (90fpm) according to the test standard; 
2. The resistance and air flow of the Close-pleat high efficiency filter are approximately proportional relationship.

3. “Recommended airflow” is only for non-unidirectional flow clean systems, such as dilution systems (also known as turbulent flow clean room)

 

Efficiency and Specifications Comparison

European Specification CEN EN 1822	MPPS Efficiency	Any point scan Local eff.	Ep.0.3mm eff.	Correspond to American Standard
H13	≥99.95%	≥99.75%	≥99.99%	MERV18
H14	≥99.995%	≥99.975%	≥99.999%	MERV19
H15	≥99.9995%	≥99.9975%	≥99.9999%	MERV20
H15	≥99.99995%	≥99.99975%	≥99.99999%	MERV20