Main Products: Engraving And Milling Machine ,Electrical Discharge Machine ,Vertical Machining Center
Vertical Miller/Drilling &Milling Machine/Machine Tool SWX-1200,SWX-1600
Negotiable /Set
Min.Order:1 Set
Quick Details View All >
Nantong Sunway Science and Technology Development Co., Ltd.
Business Type: Manufacturer,Trading Company
Nantong Jiangsu ChinaMain Products: Engraving And Milling Machine ,Electrical Discharge Machine ,Vertical Machining CenterProduct Details
Vertical Miller/Drilling &Milling Machine/Machine Tool
SWX-1200,SWX-1600 Features:
1.X axis and Y axis adopt the square lead rail.And the rigidity is good.
2.The wear resistence of X axis and Y axis is excellent by heating tratement of high-frequency.That may increase the life span.
3.It adopts the high faction cast iron.So it doesn't distort after two processing.
4.Adopting meehanite casting, precision bored and honed milling head,precision hardened and ground ways and table.
Specifications:
Model | Unit | SWX-1200 | SWX-1600 |
Working surface | mm | 2200/1800×450 | 2200×500 |
Longitudinal travel | mm | 1600/1200 | 1600 |
Cross reavel | mm | 505 | 600 |
T-slot size | mm | 18×5×85 | 18×5×85 |
Longitudinal&cross feeds | mm/min | (12 steps)10-1650 | (12 steps)10-1520 |
Longitudinal&cross rapid traverse | mm/min | 3000 | 3000 |
Headstock travel | mm | 600 | 720 |
Headstock feeds | mm/min | (12 steps)5-825 | (12 steps)5-825 |
Headstock rapid traverse | mm/min | 1500mm/min | 1500mm/min |
Spindle speeds | rpm | (12 steps)60-1720 | (12 steps)60-1720 |
Spindle nose taper | NT50 | NT50 | |
Spindle nose to table surface | mm | 50-650 | 80-800 |
Spindle center to column | mm | 500 | 600 |
Main motor | kw | 7.5 | 11 |
Feed motor | kw | 1.5 | 1.5 |
Lubricator motor | kw | 0.2 | 0.2 |
Coolant pump | kw | 0.125 | 0.125 |
Weight | kg | 5000 | 7500 |
Accessories:
Model | Standard Accessories | Special Accessories |
SWX-1200(1600) | Hand oil lubricator | Clamping board |
Pull rod | 6 machine vice (angle lock or hydraulic) | |
Toolbox with tools | Automatic feed equipment of table(L/R or F/B) | |
Wayover forward and back | Collets of R8 (7PCS) | |
Operatation Manual | Tool holder and collets of NT30 (7PCS) | |
Electrical box | Tool holder and collets of NT40 (7PCS) | |
Worklamp | Colling system and waterpond | |
Optical scale | ||
Horizontal milling device |
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln