Name: One 1000M RJ45 Port Gigabit Fiber Media Converter
Brand: HiOSO
Availability: InStock

Product Details

One 1000M RJ45 Port Gigabit Fiber Media Converter rt

Overview
HiOSO FC1000 Gigabit Ethernet Fiber Converter uses the physical layer technology to implement media conversion, which complies with the IEEE802.3z and IEEE802.3ab standards. It conducts mutual conversion between 1000Base-T twisted pair electrical signal and 1000Base-SX/LX optical signal. FC1000 extends the transmission distance of a network from 100m over copper wires to 120Km.

FC1000 directly converts the received data to another port, so the packet transmitting rate is higher than that of a switching-type fiber converter. This is the advantage of physical layer fiber converter.

Features

Supporting mutual conversion between 1000Base-T and 1000Base-SX/LX; or mutual conversion between 100Base-TX and 100Base-FX;
Supporting full-duplex and half-duplex transmission modes and capable of automatic negotiation;
Supporting automatic cross of twisted pair ports, for the convenience of system debugging and installation;
Supporting low-delay transmission;
Supporting direct and transparent transmission of packets in different lengths;
Supporting the transmission of extra-long packets over VLAN;
Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;
Supporting Spanning Tree Protocol (STP) to form a redundant network;
Supporting multiple types of fiber ports such as dual-fiber multi-modedual-fiber single-mode and single-fiber single-mode, to satisfy the extended requirements of users.

Application
1000 Mbps Gigabit Optical Ethernet network

Technical Specifications

Parameters	Specifications
Access mode	1000Mbps Gigabit Ethernet or 100Mbps fast Ethernet
Standard	IEEE802.3z 1000Base-SX/LX , IEEE802.3ab 1000Base-T Gigabit Ethernet IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength	850nm/1310nm/1550nm
Transmission distance	Dual-fiber multi-mode: 220m (fiber size: 62.5/125μm)/550m (fiber size: 50/125μm) Dual-fiber single-mode: 10/20/40/60/80/100/120Km Single-fiber single-mode: 10/20/40/60/80Km Category-5 twisted pairs: 100m
Port	One RJ45 port: Connected to STP/UTP category-5 twisted pairs One fiber port: Dual-mode and multi-mode SC (fiber size: 50,62.5/125μm) Dual-fiber single-mode SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode SC/FC fiber port (fiber size: 9/125μm)
Conversion mode	Medium conversion
Delay	<0.9μs
Bit error rate	<1/1000000000
MTBF	100,000 hours
LED	POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), ACT (packet forwarding action)
Power	AC220 0.5A/DC-48 (built-in)
Power consumption	5W
Operating temperature	-10~55°C
Operating humidity	5%~90%
Storage temperature	-40~70°C
Storage humidity	5%~90% (non-condensing)
Dimensions	26mm(H)85mm(W)135mm(D) (height * width * depth) (built-in power) 110mm(H)22mm(W)81mm(D) (height * width * depth) (module card)

Ordering Information

Model	Rate (Mbps)	Mode	Working Wavelength	Transmission distance	Fiber interface	Power
FC1000P-M2-SC	1000	Dual-fiber multi-mode	850nm	220/550m	SC	Built-in AC220V/DC-48V
FC1000C-M2-SC	1000	Dual-fiber multi-mode	850nm	220/550m	SC	Module card DC5V
FC1000P-S10/20/40-SC	1000	Dual-fiber single-mode	1310nm	10/20/40km	SC	Built-in AC220V/DC-48V
FC1000P-S60/80/100/120-SC	1000	Dual-fiber single-mode	1550nm	60/80/100/120km	SC	Built-in AC220V/DC-48V
FC1000C-S10/20/40-SC	1000	Dual-fiber single-mode	1310nm	10/20/40km	SC	Module card DC5V
FC1000C-S60/80/100/120-SC	1000	Dual-fiber single-mode	1550nm	60/80/100/120km	SC	Module card DC5V
FC1000PS-S10/20-SC	1000	Single-fiber single-mode	1310/1550nm	10/20km	SC	Built-in AC220V/DC-48V
FC1000PS-S40/60/80-SC	1000	Single-fiber single-mode	1310/1550nm	40/60/80km	SC	Built-in AC220V/DC-48V
FC1000CS-S10/20-SC	1000	Single-fiber single-mode	1310/1550nm	10/20km	SC	Module card DC5V
FC1000CS-S40/60/80 SC	1000	Single-fiber single-mode	1310/1550nm	40/60/80km	SC	Module card DC5V

Certificates