1. C5000 CWDM chassis
1.1.1 Overview
HiOSO C5000 series CWDM devices can effectively replace layout of optical cables, which improves bandwidth utilization at a low cost.
It is applicable to the construction of short and medium-distance IP broadband Metropolitan Area Networks (MANS) and access networks, especially applicable to network carriers who:
1) cannot lay optical cables conveniently ,
2) rent optical cables ,
3) do not have sufficient optical cables,
4) want to improve the bandwidth utilization of optical cables.
Haishuo C5000 series devices are developed on the basis of CWDM technology, through which multiple wavelength channels with a wavelength interval of 20nm are multiplexed into one or a pair of fibers to implement signal transmission.
It can be used in point-to-point and point-to-multipoint application, and can also work with wavelength routers. With the application of non-cooling laser technology and EDFA technology, it has great cost advantage in building broadband MANS and access networks. It can provide interfaces in multiple data formats, such as EFEGE STM-1/4/16 interfaces and fiber channels.
External interface: Interface for out signal input; interface type can be RJ45 or fiber port, connecting with switches and fiber optical converters etc, to implement signal input.
Internal interface: CWDM signal conversion port; output signal wavelengths are CWDM wave band (1470nm-1610nm), easy for multiplexing and output.
COM: Multiplexing signal output port, a port for signal output after multiplexing; interface type is SC.
Remarks: Module cards support hot-swap; directly replacing and increasing new cards are supportable.
1.1.2 C5000 series chassis
- C5004S single-fiber4 channels bidirectional concourse
- C5008D dual-fiber8 channels bidirectional concourse
- C5008S single-fiber8 channels bidirectional concourse
- C50016D16 channels bidirectional concourse
1.1.3 Technical specification
Parameters | specification |
Internal Optical Interface | |
Central wavelength | 11270nm1290nm1310nm1330nm1350nm1370nm 1430nm1450nm |
Channel spacing | 20nm |
Optical pass band width | +/- 6 nm |
Temperature drift of central wavelength | 0.08nm0.1nm/°C |
Transmitted optical power | -10dBm+3dBm |
Received optical power | -24dBm-3dBm |
Optical receiving pass band | 1270nm1610nm |
LOS alarm power at receive end | -25dBm-30dBm |
Receiving sensitivity | < -20dBm |
Maximum input power | 0dBm+6dBm |
Interface type | SCFCLC |
External interface | |
Optical interface | SCFCLC |
Standard for optical interfaces | 100BASE-FX1000BASE-FXSTM-1/4/16 fiber port |
Wavelength | 850nm1310nm1550nm |
Fiber | Single-mode or multi-mode fiber |
Twisted-pair electrical interface | RJ45 |
Twisted-pair interface standard | 10Base-T100Base-TX1000Base-T |
Management features | |
Features of network management interface | Out band management interface: 10/100/MBASE-T adaptive Ethernet RJ45 port; |
Operating environment | |
Temperature &humidity | 0 ~ 45,10 ~ 90,non-condensing |
Store environment | |
Temperature &humidity | -40 ~ 70,10 ~ 90,non-condensing |
Power supply | |
Power and consumption | AC power: 90 ~ 260V,50~60Hz, |
Parameters | |
Dimension | 440mm×220mm×132mm |
Styles | |
C5004S | Single fiber 4 channels bidirectional concourse |
C5008D | Dual fiber 8 channels bidirectional concourse |
C5004S | Single fiber 8 channels bidirectional concourse |
C5008D | Dual fiber 16 channels bidirectional concourse |
parameters | |
Data rate | 10 Mbps ~ 1.25Gbps and 2.5Gbps |
The most capacity | 16 dual direction in a fiber |
Management system | SNMP GUI and CLIfor performance/ alarm/ fault/ configuration management |
Type | 2-4 channels single direction, 2-8 channels dual-direction |
Distance ? | 40km60km80km,110km optional |
Topology | Point-to-point, point-to-multipoint |
Shape | 3U chassis |
