Specifications
Home automation ip alarm system;Support Andriod/IOS APP;
Notify by PUSH/email via the internet;
No SIM card ,no monthly fees
Smart home burglar security IP Cloud alarm system Finseen FC-300
868MHz, 99 wireless zone IP Alarm
IP Alarm is a new burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, either by PUSH or e-mail. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system from anywhere as long as your phone or tabletis connected to the internet. The central unit of the system is the IP Alarm Scanner.
All control is done by the app.
Benefits:
No SIM Card!
No Phone Line Required!
Easy to hide design!
Easy to install!
Stable platform for the alarm to transmit alarm signals.
Process:
IP Alarm APP interface:
System Operation:
• FullArm/HomeArm
1. Command by IP Alarm app or wireless remote control
2. Acoustic confirmation by the base unit.
3. User notification by push and email
4. By use of Exit delay (Set time 0-59s in IP App)
♦ Acoustic buzzer sounds each second during exit delay
♦ Long sound confirm a successful arm
• Disarm
1. Command by IP Alarm app or wireless remote control
2. Acoustic confirmation by the base unit.
3. User notification by push and email
4. By use of entry delay (Set time 0-59s in IP App)
♦ Acoustic buzzer sounds each second during entry delay
♦Two short sounds confirm a successful disarm
Alarm Host
The IP Alarm Host keeps watch in your home - even when you are not there. It is the alarm’s central component. It gathers data and starts the sirens in the event of fire and break-in. |
Door/Window Sensor
Finseen IP Alarm’s door/window sensor is an intelligent switch, which you attach to the doors and windows or other places in your home where you want control or an alarm in the event of a break-in. Generally set as Perimeter zone . If any door or window is opened, it will transmit the alarm signals to the alarm host. |
PIR Detector
Mainly monitor and control indoor space, generally set as Motion zone. When human body enters into detecting area, the sensor will transmit alarm signals to the alarm host. |
Remote Control
To control the alarm host to arm and disarm. With the emergency key for urgent help. FSK technology. |
Smoke Detector Gas Detector Indoor Siren
Feature:
1) Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.
2) Learn Remote Control and Detector ; Delete Remote Control and Detector.
3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.
4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).
5) Upload Low voltage of Detector, Alarm Zone, Tamper-Proof triggered.
6) Support setting alarm zone with intellegent door sensor function: triggerred by open or close door, and upload Status of Alarm zone.
7) Alarm siren keeping time is 2minutes.
8) Can be set with 10pcs of Remote Control ID.
9) Can be set with 99 wireless zone, and each zone can learn 1pc of accessories.
Alarm Zone:
There is 100 alarm wireless zone in total for alarm panel.
00 : Wireless Remote control (10pcs in total)
01-19 : 24hours zone (19 wireless zone in total)
20-59 : Perimeter zone (40 wireless zone in total)
60-99 : Motion zone (40 wireless zone in total)
Setup notification service in IP Alarm app:
1. Email receiver
2. Push receiver
3. Notification level
4.Alarm
•Burglary
•Fire and Smoke
•Gas
System setup in IP Alarm app:
1. Arm delay (Exit delay)
2. Alarm delay (Entry Delay)
3. Siren enabled/disabled
Setup devices in IP Alarm app:
1. Setup devices in IP Alarm app
2. Delete devices
3. Name devices
Sensor system capability (Total: 99):
1. 10 pcs Remote controls
2. 19 pcs Smoke detector or gas detector
3. 40 pcs Door /Window sensor
4. 40 pcs Motion detectors
Warning:
1. Power supply interrupted Power Supply, interrupted
2. Power Supply, recovered
3. System Battery backup, low
4. System Battery backup, recovered
5. Sensor, Tamper check
6. Sensor, Low voltage
7. Sensor Tamper detection
Latch:
1. Alarm FullArmed by user xxx
2. Alarm HomeArmed by user xxx
3. Alarm Disarmed by user xxx
Specification:
Power supply | 5V/1000MA |
Battery | lithium battery 800MA/H |
Standby Current | 220MA |
Alarm Current | 310MA |
Receiving Frequency | 868MHz |
Emitting frequency | 868MHz |
Receiving and emitting distance | More than 100metres under open area |
A Standard package:
Package list:
1pc | IP Cloud Alarm Host |
1pc | Wireless Door/Window Sensor |
1pc | Wireless PIR Detector |
1pc | Remote Control |
1pc | Power supply |
1pc | User manual |
Service principle: 1) Finseen provides easy,reliable, speedy service to all Allarm products under our warranty.
2) The warranty lasts for 24 months from the date of shipment.
3) The product warranty does not cover the quality problems of product which are caused by natural disasters or human error such as the damage caused by high voltage. Customers need to pay maintenance costs for the damages caused by natural disasters or human error. We provide maintenance of products which are within the warranty period.
1. What iOS devices are compatible with the Finseen Cloud based IP Alarm system?
Compatible for Iphone or Ipad which is with iOS 5.0 above.
2. What Android devices are compatible with the Finseen Cloud based IP Alarm system?
Compatible for Android 2.3 above.
3. How can I log in APP?
Turn back the alarm host, you can find the Alarm ID and password from the sticker.
Then enter the ID and password and follow the guide to enter into your account email, user name etc.
4. How can I know if the enroll sensors is successful or fail?
If your enroll succeeded, Red light of alarm host will flash quickly for 5seconds and the acoustic buzzer sound with 5 beeps at same rate as red light flashes.
But if your Enroll failed, Red light of alarm hot will be off, and Acoustic buzzer sound 1.5 s.
5. How many sensors in maximum that I can enroll in total?
You can enroll in max.10 pcs Remote controls, 19 pcs Smoke detector or gas detector, 40 pcs Door /Window sensor and 40 pcs Motion detectors.
6. How can I change the password?
Go to “Set up ”profile, and choose “ change password”.
Then enter the old password, followed by enter a new password. Repeat the new password to ensure correct entry.