bus bar heat shrink tube/heat shrink sleeve pipe for mechanical protection
USD $0.01 - $10 /Meter
Min.Order:500 Meters
Shenzhen Dicore Technology Co., Ltd.
Heat shrinkable silicone rubber pipe /small diameter silicone tube /pipe sleeve detail
Heat shrinkable rubber tube 1.5mm /small silicone tube /fire hose branch pipes
Heat shrinkable elastic silicone rubber tube 8.0mm /tube 89 /tube exercise
Heat Shrink silicone rubber insulation tube /sleeves /pipe /hose
Silicone Rubber Heat Shrink Tubing /silicone foam tubing pipe
bus bar heat shrink tube/heat shrink sleeve pipe for mechanical protection
Heat Shrink Bus-bar Tubing Provides high resistance to tracking and arching and used to enhance the insulation properties of bus bar in switchgear and substation. The continuous length of supplied products makes it to be used more conveniently and economically.Avoid short circuit fault caused by small animals such as mice, snakes and so on. Prevent bus bar from chemical corrosion effected by strong acid, alkali, salt, etc. Avoid accidental injure, for instance, that overhaul person enter electriferous clearance by mistakes. Be suit to the trend of smaller switch cabinets. Be applied in bus duct for insulation among buses.
COLORS: Red, Green, Yellow, Black(Other colors available on request.)
Property:
Item | Test Method | Value |
Tensile Strength | ASTM D 2671 | ≥8Mpa |
Elongation at break | ASTM D 2671 | ≥300% |
Tensile Strength after aging | 130°C x 168h | ≥6.9Mpa |
Elongation at break after aging | 130°C x 168h | ≥100% |
Longitudinal Shrinkage | ASTM D 2671 | -8%~8% |
Oxygen Index | GB/T 2406 | ≥27 |
Heat Shock | JB7829 D | No Crack |
Breakdown Strength | ASTM 3 149 | ≥20KV/mm |
Rigidity (Shore A) | GB 2411 | ≤90 |
Volume Resistivity | IEC 60093 | 10 14Ω . Cm |
Specification:
1KV
SIZE (mm) | As Supplied(mm) | After Recovery(mm) | Packing (m/roll) | |
I. D. | I. D. (max) | W. T. | ||
30 | 31.5±1.0 | 15.0 | 1.0±0.15 | 50 |
35 | 36.5±1.0 | 17.5 | 1.0±0.15 | 50 |
40 | 41.5±1.0 | 20.0 | 1.0±0.15 | 50 |
50 | ≥50 | 25.0 | 1.1±0.15 | 25 |
60 | ≥60 | 30.0 | 1.2±0.15 | 25 |
70 | ≥70 | 35.0 | 1.3±0.15 | 25 |
80 | ≥80 | 40.0 | 1.3±0.20 | 25 |
90 | ≥90 | 45.0 | 1.3±0.20 | 25 |
100 | ≥100 | 50.0 | 1.3±0.20 | 25 |
120 | ≥120 | 60.0 | 1.3±0.20 | 25 |
150 | ≥150 | 75.0 | 1.3±0.20 | 25 |
180 | ≥180 | 90.0 | 1.3±0.20 | 25 |
210 | ≥210 | 105 | 1.3±0.30 | 25 |
230 | ≥230 | 115 | 1.3±0.30 | 25 |
250 | ≥250 | 125 | 1.3±0.30 | 25 |
300 | ≥300 | 150 | 1.3±0.30 | 25 |
10kv
SIZE (mm) | As Supplied(mm) | After Recovery(mm) | Packing (m/roll) | |
I. D. | I. D. (max) | W. T. | ||
15 | ≥15 | 6.0 | 2.5±0.20 | 25 |
20 | ≥20 | 8.0 | 2.5±0.20 | 25 |
25 | ≥25 | 10.0 | 2.5±0.20 | 25 |
30 | ≥30 | 12.0 | 2.5±0.20 | 25 |
40 | ≥40 | 16.0 | 2.8±0.30 | 25 |
50 | ≥50 | 20.0 | 2.8±0.30 | 25 |
65 | ≥65 | 26.0 | 2.8±0.30 | 25 |
75 | ≥75 | 30.0 | 2.8±0.30 | 25 |
85 | ≥85 | 34.0 | 2.8±0.30 | 25 |
100 | ≥100 | 40.0 | 2.8±0.30 | 25 |
120 | ≥120 | 48.0 | 2.8±0.30 | 25 |
150 | ≥150 | 60.0 | 2.8±0.30 | 25 |
180 | ≥180 | 72.0 | 2.8±0.30 | 25 |
210 | ≥210 | 84.0 | 2.8±0.30 | 20 |
230 | ≥230 | 92.0 | 2.8±0.30 | 20 |
250 | ≥250 | 100 | 2.8±0.30 | 20 |
300 | ≥300 | 120 | 2.8±0.30 | 15 |
35kv
SIZE (mm) | As Supplied(mm) | After Recovery(mm) | Packing (m/roll) | |
I. D. | I. D. (max) | W. T. | ||
30 | ≥30 | 15.0 | 4.0±0.30 | 15 |
40 | ≥40 | 20.0 | 4.0±0.30 | 15 |
50 | ≥50 | 25.0 | 4.0±0.30 | 15 |
65 | ≥65 | 33.0 | 4.0±0.30 | 15 |
75 | ≥75 | 38.0 | 4.0±0.30 | 15 |
85 | ≥85 | 43.0 | 4.0±0.30 | 15 |
100 | ≥100 | 50.0 | 4.0±0.30 | 15 |
120 | ≥120 | 60.0 | 4.0±0.30 | 15 |
150 | ≥150 | 75.0 | 4.0±0.30 | 15 |
180 | ≥180 | 90.0 | 4.0±0.30 | 15 |
210 | ≥210 | 105 | 4.0±0.30 | 15 |
230 | ≥230 | 115 | 4.0±0.30 | 15 |
250 | ≥250 | 125 | 4.0±0.30 | 15 |
300 | ≥300 | 150 | 4.0±0.30 | 15 |
Other products:
Company Profile
Dicore is a professional supplier of various heat shrinkable products, including Different kinds of Heat Shrinkable Tubing/Sleevings, Heat Shrinkable Moulded Shapes products from kinds of material like Polyolefin, Silicone Rubber, PTFE, Polyvinylidene Fluoride(PVDF), Fluoroelastomer(Viton),etc. They are widely used in the field of Energy, Electronic, Automotive, Communications, Military, and Building&shipbuilding to provide effective insulation and protection the functional parts, components and systems.
Dicore has been dedicated to this field since 2003 as an exporter and distributor, and set up our own factory and technical engineering team in the year of 2007. All products presented to our clients have already passed our interior strict quality control examination, which enable our clients to easily choose suitable products with exceptional quality.
Dicore draws upon its powerful Technology team, big producing capacity, well-known purchasing ability and close relationship with manufactures to offer full line products with exceptional quality, and bring productivity improvements to our clients. As an One-Stop supplier, we have our special advantages in this field as following: