Product Details

Balustrade heat shrink cable adhesive ling end caps

Applications
Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.

Model	HSEC
Material	PE and adhesive
Type	standard length, extended length, and with valve
Tubing diameter	12mm to 200mm
Standard color	Black
Heat shrink cable end caps designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.

Technical Data

Property	Test Method	Typical Data
Operating temperature	IEC 216	-55°C to +110°C
Tensile strength	ASTM D 638	>14 MPa
Elongation at break	ASTM D 638	> 400%
Density	ASTM D 792	1.05
Elongation at break after aging	150°C, 168hrs	>300%
Dielectric strength	IEC 243	>15KV/mm
Volume resistance	IEC 93	>1014Ω.cm

Part No.	Inner Diameter			After fully recovered Length ± 10%	After fully recovered Width ± 10%	Cable diameter
Part No.	As supplied (min)		After fully recovered (max)	After fully recovered Length ± 10%	After fully recovered Width ± 10%	Cable diameter
Standard length end cap
HSEC-12/ 4		12	4.0	40	2.6	4-10
HSEC-14/ 5		14	5.0	45	2.2	5-12
HSEC-20/ 6		20	6.0	55	2.8	6-16
HSEC-25/ 8.5		25	8.5	68	2.8	10-20
HSEC-35/ 16		35	16.0	83	3.3	17-30
HSEC-40/ 15		40	15.0	83	3.3	18-32
HSEC-55/ 26		55	26.0	103	3.5	28-48
HSEC-75/ 36		75	36.0	120	4.0	45-68
HSEC-100/ 52		100	52.0	140	4.0	55-90
HSEC-120/ 60		120	60.0	150	4.0	65-110
HSEC-145/ 60		145	60.0	150	4.0	70-130
HSEC-160/ 82		160	82.0	150	4.0	90-150
HSEC-200/ 90		200	90.0	160	4.2	100-180
Extended length end cap

Balustrade heat shrink cable adhesive ling end caps

Other products:

Company Profile

Dicore is a professional supplier of various heat shrinkable products, including Different kinds of Heat Shrinkable Tubing/Sleevings, Heat Shrinkable Moulded Shapes products from kinds of material like Polyolefin, Silicone Rubber, PTFE, Polyvinylidene Fluoride(PVDF), Fluoroelastomer(Viton),etc. They are widely used in the field of Energy, Electronic, Automotive, Communications, Military, and Building&shipbuilding to provide effective insulation and protection the functional parts, components and systems.

Dicore has been dedicated to this field since 2003 as an exporter and distributor, and set up our own factory and technical engineering team in the year of 2007. All products presented to our clients have already passed our interior strict quality control examination, which enable our clients to easily choose suitable products with exceptional quality.

Dicore draws upon its powerful Technology team, big producing capacity, well-known purchasing ability and close relationship with manufactures to offer full line products with exceptional quality, and bring productivity improvements to our clients. As an One-Stop supplier, we have our special advantages in this field as following: