Name: Waterproof electrical terminal connector in wire terminals
Brand: Dicore
Availability: InStock

Product Details

Waterproof electrical terminal connector in wire terminals

Description

SolderSleeve Wire Splices is one piece design, it consists of transparent heat shrinkable sleeve and fluxed solder Provides insulation, inspection, strain relief and water proof. Makes installation easily and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, it’s very convenience to use the exact wire dimension.

Application:

In-line Wire splices

Operating Termperature Range:

>Operating temperature : -55 ℃~125 ℃

>Fully recovery temperature : 130 ℃

>Temperature of fully solder melt : 150 ℃

Model	DHSCS
Material	Adhesvie PE heat shrink terminals
Shrink ratio	2:1
Standard color	red, blue, yellow
1.Automotive/truck wiring repair and fleet maintenance 2.Automotive/truck/RV wire harness fabrication 3.Commercial wiring for pumps, pools and spas 4.Fleet maintenance & Marine electronics

Test ltem		Characterisrics	Test condition
Un-aged	Tensile strength	Min. 1.40 kgf/	Room temp.
	Elongation	Min. 200%
Aged	Tensile strength	Min. 0.99 kgf/	158°C/7 days
	Elongation	Min. 100%
Voltage withstand and breakdown Voltage(Un-aged)		Withstand 2.5 KV for 1minute and breakdown	Room temp.
Voltage withstand and breakdown Voltage(Aged)		Withstand 2.5 KV for 1minute and breakdown at least half of un-aged breakdown voltage	158°C/7 days
Copper corrosion		No corrosion of bare copper	158°C/7 days
Copper stability		No sign of degradation Min.Elongation 100%	158°C/7 days
Cold bend		No crack	-30°C/1 hrs
Maximum secant modulus(2%)		17.65 kgf/	-
Volume resistivity		Min.1014Ω-cm	-
Heat shock		No crack	250°C/4 hrs

Specification

Part. No	Wire Range		Dimension-(mm)			Insulator	color	package	Approval
Part. No	A.W.G.	mm²	OD	ID	L	Insulator	color	Pcs/bag	Approval
DHSCS -1	22-18	0.5-1.0	3.8	1.7	35.0	PE	Red	1000	RoHS
DHSCS -2	16-14	1.5-2.5	4.8	2.4	35.0	PE	Blue	1000	RoHS
DHSCS -3	12-10	4.0-6.0	5.7	3.6	42.0	PE	Yellow	800	RoHS

Waterproof electrical terminal connector in wire terminals

Other products:

Company Profile

Dicore is a professional supplier of various heat shrinkable products, including Different kinds of Heat Shrinkable Tubing/Sleevings, Heat Shrinkable Moulded Shapes products from kinds of material like Polyolefin, Silicone Rubber, PTFE, Polyvinylidene Fluoride(PVDF), Fluoroelastomer(Viton),etc. They are widely used in the field of Energy, Electronic, Automotive, Communications, Military, and Building&shipbuilding to provide effective insulation and protection the functional parts, components and systems.

Dicore has been dedicated to this field since 2003 as an exporter and distributor, and set up our own factory and technical engineering team in the year of 2007. All products presented to our clients have already passed our interior strict quality control examination, which enable our clients to easily choose suitable products with exceptional quality.

Dicore draws upon its powerful Technology team, big producing capacity, well-known purchasing ability and close relationship with manufactures to offer full line products with exceptional quality, and bring productivity improvements to our clients. As an One-Stop supplier, we have our special advantages in this field as following: