Product Details

Product Description

Product Application

Horizontal Plough Shear Mixer is a new type of mixing equipment with high efficiency, good mixing effect and, low energy consumption, low pollution. It is widely used for mixing materials such as powder, liquid, granule, especially for materials with high density or need to be crushed or grind such as cement ,fertilizer or detergent powder.

One. Descriptive abstract:

The Horizontal Ribbon Mixer consist of U-Shape tank, spiral and drive parts. The spiral is dual structure. Outer spiral make the material move from the sides to the center of the tank and the inner screw conveyor the material from the center to the sides to get the convective mixing. Our TDPM series Ribbon mixer can mix many kinds material especially for the powder and granular which with stick or cohesion character, or add a little liquid and paste material into powder and granular material. The mixture effect is high. The cover of the tank can be made as open in order to cleaning and change parts easily.

Two. Characteristics:

1. High mixing uniformity. Ribbon with disconnected structure produced greater shear motion as opposed to a continuous ribbon, allows the formation of more material in the vortex flow, speed up the mixing speed, improved blend uniformity.
2. High speed. TDPM series mixer with Horizontal tank, single shaft with dual spiral symmetry circle structure. The disconnected ribbon of the mixer can make the material mixed with more high speed.
3. Uniformity in short time. Dual spiral symmetry circle structure. Outer spiral make the material move from the sides to the center of the tank and the inner screw conveyor the material from the center to the sides to get the convective mixing.

4. No material deposit and without dead angle when mixing. Under the bottom of the tank, there has a flap dome valve (pneumatic control or manual control) of the center. The valve is arc design that assure no material deposit and without dead angle when mixing. Reliable regula- seal prohibit the leakage between the frequent close and open.
5 . Durable & stable. All the material except the motor is made of Stainless Steel 304.
6. TDPM series mixer is with CE certificate.

Optional:
1. The top cover of the U Shape tank has the entrance for material. It can be also designed with spray or add liquid device according the customer’s needs.

2. This mixer also can be designed with the function to keep cold or heat. Add one layer outside the tank and put into medium into the interlayer to get the mixing material cold or heat. Usually use water for cool and hot steam or use electrical for heat

Three. Technical Parameter:

Model	TDPM 100	TDPM 200	TDPM 300	TDPM 500	TDPM 1000	TDPM 1500	TDPM 2000
Effective Volume	100L	200L	300L	500L	1000L	1500L	2000L
Volume	140L	280L	420L	710L	1420L	1800L	2400L
Turning Speed	46rpm	46rpm	46rpm	46rpm	46rpm	46rpm	46rpm
Overall Size(mm)	1100x750x1300	1370x834x1647	1550x970x 1655	1773x110x 1855	2394x1320x2187	2715x1397x2313	308016252453
Volume of Barrel(mm)	680420490	888554637	1044614697	1219754835	15009001050	18009701155	200010681274
Radius of Barrel(mm)	210	277	307	377	450	485	534
Total Power	3KW	4KW	5.5KW	7.5KW	11KW	15 KW	22 KW
Total Power 3 phase 208-415v 50/60HZ

Four. Configuration List：

No.	Name	Model Specification	PRODUCING AREA,Brand
1	Stainless steel	SUS304	China
2	Motor		Wan xin
3	Reducer		Wan Xin
4	Electromagnetic valve		Taiwan SHAKO
5	Cylinder		Taiwan Airtac
6	Switch		Wenzhou Cansen
7	Circuit breaker		Schneider
8	Emergency switch		Schneider
9	Switch		Schneider
10	Contactor		Schneider
11	Assist contactor		Schneider
12	Heat relay		Omron
13	Relay	MY2NJ 24DC	Japan Omron
14	Timer relay		Japan Omron

Five. Dimension Drawing:

Six. Parts

Part 1. Spiral:

The spiral is dual structure:
Outer spiral make the material move from the sides to the center of the tank and the inner screw conveyor the material from the center to the sides to get the convective mixing

Part 2. Discharge hole:

Pneumatic valve control discharge hole
No material deposit and without dead angle when mixing