Name: EVA foam filled floating bumper/ boat anti explosion foam filled polyurethane bumper
Brand: Xincheng
Availability: InStock

Product Details

Specifications:

Polyurethane Foam Floating Fender:

1. ISO 17357 approved
2. Meet EU Standard
3. Design Life:15years

EVA foam filled floating bumper/ boat anti explosion foam filled polyurethane bumper

Product Description

Polyurethane Foam Filled Dock Fender is a kind of constructive fender with polyurethane materials as its outer protective layer and polyethylene or plastic foam core forming the resilient inner part. Through comoressive deformation to absorb impacting energy of the ship when using. So that it can reduce destructive effect to the pier and the ship.

Feature of polyurethane floating fender

Spraying polyurethane the foam fender used in today's world the most advanced polyurea elastomer production technology, this technology is nearly 10 years abroad developed a new type of solvent free, no pollution green construction technology, the product features below:

1, core material for closed pore high rebound foam, quality is small, can absorb the gender is good. Core material for closed pore high elastic resilient bubble solid, even if damaged also won't sink.

2, skin layer-spraying polyurea elastomer(SPUA) is called wear resisting rubber, the water resistance is 10 times as much carbon steel, epoxy resin is the 3-5 times. oil resistance almost same with butyl rubber. tensile strength, elogation , tear strength in outdoor exposure after four years basic keep in the inital strength state.

3, normal pipeline corrosion materials such as melting and resistance of epoxy powder, salt fog test generally no more than 500 h, the actual service life in 10 years the following; 0.5 mm spraying type polyurea elastomer 10000 h, salt fog test without any corrosion phenomenon, is expected to use life is as high as 50 years.

4, polyurea protection layer coating system for aromatic 100% solids, do not contain any volatile organic compounds, exposure to ultraviolet rays (uv) need high stability, high; But in 120 ℃ long-term use under, good thermal stability.

5, polyurethane the foam fender light weight, fender large deformation, the adaptability is strong, tilting the compression performance is good, it and general rubber fenders absorb energy compared, and produce reaction of small

6, reliable performance, convenient installation, maintenance costs low, beautiful and practical.

7, SPUA spraying technology production fender overcome the limitations of the use of mould, in the production from product size limit, meet customer requirements of different sizes of products

Packaging & Shipping

1. The fenders can be packed in woven bags/plastic foam bags, then into container

2. Can be packed as customer need

Specification of the Polyurethane foam fender:

D*L	Intitle pressure(Po) is 0.05Mpa			Test pressure Mpa	Intitle pressure(Po) is 0.08Mpa			Test pressure Mpa
D*L	Weigh	R(KN)	E(KJ)	Test pressure Mpa	Weigh	R(KN)	E(KJ)	Test pressure Mpa
0.5*1.0	24	6	64	0.15	27	8	86	0.18
0.6*1.2	35	10	86	0.15	39	16	124	0.18
0.7*1.5	50	17	136	0.15	55	24	180	0.18
1.0*1.5	80	32	181	0.15	88	45	238	0.18
1.0*2.0	100	45	256	0.15	110	63	338	0.18
1.2*2.0	120	62	296	0.15	120	88	389	0.18
1.35*2.5	170	100	426	0.15	183	141	560	0.18
1.5*3.0	320	152	578	0.15	355	214	760	0.18
1.7*3.0	400	190	637	0.15	440	268	840	0.18
2.0*3.5	590	306	875	0.15	650	430	1150	0.18
2.5*4.0	1050	660	1378	0.15	1150	925	1815	0.2
2.5*5.5	1350	932	2010	0.118	1480	1315	2650	0.2
3.0*5.0	1880	1070	2100	0.18	2060	1360	2520	0.25
3.0*6.0	2180	1360	2530	0.18	2400	1670	3210	0.25
3.3*4.5	2020	1170	1880	0.18	2220	1640	2470	0.25
3.3*6.5	2700	1810	3010	0.18	2960	2530	3960	0.25

Performance of our polyurethane foam filled fender: