Specifications

Simplicity in structure.
Uniform feed material.
Continuous performance.

Introduction of vibrating feeder

used to transfer the large size materials and granular materials from hopper to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line.Widely applied in combined operation of crushing and screening in the industries like metallurgy, mine, mine selection, building materials, chemicals, electricity, machinery etc

 

 

 

Working principle of vibrating feeder

There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like Para curve, then fall down. The materials will move forward on the slope surface of the feeder.

  
Technical Parameters of vibrating feeder

Model	Hopper Size (mm)	Max. Feed Size (mm)	Production Capacity (t/h)	Eccentric Shaft Rotation Speed (r/min)	Motor Power (t)	Weight (t)	Overall Dimension (mm)
GZD-250×75	2500×750	300	50-80		1.5×2	1.29	2580×1430×600
GZD-300×90	3000×900	450	80-100		3.0×2	2.96	3050×1430×1550
GZD-370×100	3700×1050	500	100-150		3.7×2	3.7	3980×1878×866
GZD-490×110	4900×1100	580	120-280		5.5×2	4	5200×1900×950
GZD-500×120	5000×1200	600	200-400		5.5×2	5.2	5450×2000×900
ZSW-380×96	3800×960	500	100-160	500-720	11	4.21	3882×1684×1340
ZSW-490×110	4900×1100	580	120-280	500-800	15	5.41	4957×1841×1365
ZSW-590×110	5900×1100	600	200-350	500-800	22	6.05	6000×1841×1365
ZSW-600×130	6000×1300	600	400-560	500-800	22	7.5	6028×2580×2083