Zhuzhou cemented Carbide insert ISO Turning cutting tools WNMG-PM with high quality
1) Product Introduction:
Type | Dimension(mm) | ||||||
L | I.C | S | d | r |
| ||
WNMG | 160408-PM | 6.5 | 9.525 | 4.76 | 3.81 | 0.4 |
|
060412-PM | 6.5 | 9.525 | 4.76 | 3.81 | 1.2 |
| |
080608-PM | 8.7 | 12.7 | 6.35 | 5.16 | 0.8 | ||
080404-PM | 8.7 | 12.7 | 4.76 | 5.16 | 0.4 | ||
080408-PM | 8.7 | 12.7 | 4.76 | 5.16 | 0.8 | ||
080412-PM | 8.7 | 12.7 | 4.76 | 5.16 | 1.2 | ||
Grade of cemented Carbide insert ISO Turning cutting tools WNMG-PM :
XHC151:Substrate with excellent wear-resistance,in combination with MT-Ti(CN),thick layer AL2 O3, TiN coating.It is an ideal grade for the finishing steel,cast steel and stainless steel under gigh speed and dry machining.
XHC251:Cutting edge with special strength and toughness,in an optimal combination with MT-Ti(CN),thick layer AL2 O3,Tin coating.itis a suitable grades for a wide application.It is good for the finishing.Semi-finishing and Light roughing of steel,cast steel and stainless steel.
XHC351:Substrate with high strength and resistance against plastic deformation,in combination with MT-Ti(CN),thick layer AL2 O3,TiN coating.It is suitable for light roughing and roughing steel,cast steel and stainless steel.
XHM151:Substrate with special structure,in combination with Ti(CN),thin layer AL2 O3,TiN coating .Withthe resistance against diffusion wearness and plastic deformation,it is good for finishing and semi-finishing(turning as well as boring)of stainless steel.
XHM251:Substrate with good toughness and stength,in combination with Ti(CN),thin layer AL2 O3,Tin coating .It is a premium grade for semi-finishing to light roughing (turning and boring) of stainless steel at continuous and intermittent machining conditions.
XHM351: Ti(CN),thin layer AL2 O3,Tin coating with very good strength and impact resistance.It is suitable for roughing turning of stainless steels at low to moderate cutting speed or interrupted cutting,also for high cutting speed and heavy cutting in P30 area.
XHG102: in combination with PVD TiN,TiAIN coated carbide grade.Suitable for finish machining of cast iron.
XHG151:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for semi-finish turning of cast iron.
XHG252:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for rough machining of cast iron.
XHD252:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for rough machining of hard cast iron,nodular cast iron.
Cemented Carbide insert ISO Turning cutting tools WNMG-PM images:
Our Equipment:
3)Other Main Products:
Aluminum turning inserts
Commonly used models:CCGX ,DCGX ,TCGX ,VCGX ,SCGX ,SEHT,APKT.
Turning inserts
Commonly used models:CNMG ,SNMG ,TNMG ,CCMT ,WCMX ,DNMG ,SNUN ,TNGA ,
TNUN ,WNMG ,DCMT ,RPMT
Cermet and Ceramics inserts
Commonly used models:
SEKN ,SPKN ,SPRN ,SEEN ,TNGG ,CNMG ,SNMG ,TNMG ,CCMT ,DNMG ,WNUN ,
WNMG
Milling inserts
Commonly used models:
SEKN ,SPKN ,RDKW ,RPMW ,TPCN ,TPKN ,TPAN ,APKT ,APKT
3) Company Brief Introduction:
Zhuzhou XinhuaCemented CarbideIndustryCo.,Ltd is a large manufacturer and exporterfor cemented carbide and cermet inserts(such as:milling inserts,turning inserts and Aluninum inserts and so on)in China.
Our factory set up more than 20 years,and there have a abundant of experience to manufacture the cemented carbide inserts.Our produces sell well in Suoth America,EU ,Asian and so on.
Do not hestitate to contact us, we will work together well!