Specifications

electronic machine
1.both hands and foot control fingernail care
2.CE certificate
3.ABS material
4.3000-22000r/min

nail care tools and equipment&gel polish&drilling machine

 

This electronic machine is designed for special nail art,it multi-functional can control speed by both hand and foot.

 

 

Feature:

 

Shell Material: ABS

Voltage: 110-120V 220-240V

Revolution : 3000-15000r/min

Grinding diameter: 2.35mm

Power: 4-26W

Accessory: YM-1101

Packing Size: 63x45.5x30.5cm (12pcs)

 

Safty rules:

 

1. This machine must be stored in dry locations, and keep out of reach of children.

2. Be sure the electric power equals to volt of the machine before plug in.

3. Always unplug the machine when you change accessory or collect.

4. Do not engage the shaft lock button while the machine is running.

Never clean the machine in water or other liquids.

 

Using Steps:

 

· Turn switch HAND-OFF-FOOT to OFF, and plug in.

· Choose a bit in request (diameter of handle should be 2.35mm),press shaft lock button and loosen collect nut,then inset the bit and tighten the collect securely.

· Turn switch HAND-OFF-FOOT to HAND, then machine will begain to work.choose speed in request by revolving knobSPEED CONTROL.

· Alternate the rotate-direction of collect by changing turn switch R-L.

· Turn awitch HAND-OFF-FOOT to FOOT,the speed can be controlled by dominating FOOT PEDAL.

· Please turn switch to OFFand make sure the machine cools down before changing another bit.

· Always make sure the machine unplug after use.

· Clean the machine with soft cloth.Never use cleaning solvents or detergents.

 

 

CE certificate:

 

 

 

The picture about YM-1002:

 

 

 

 

 

 

Similar products: