Product Details

Company Information

Dongguan Bi Rong Packaging Material Co., Ltd

Dongguan Bi Rong Packaging Material Co., Ltd. was established in the year of 2008. We have focused on the plastic tubes for more than five years with well-equipped machinery and strong testing equipment. We can offer cosmetic plastic tubes as follows: mono-layer tube; double to five-layer tube, shapes from round, oval and more oval; diameters from 13 mm to 60 mm; capacities from 3ml to 400ml; custom length of tube sleeve (adjusted within the range of tube capacity); decorations up to offset printing, silkscreen printing, labeling and hot-stamping; colors from transparent, white to colored; finish in matte and gloss. New mold service is available for a new package development to meet customers‘ need.

DONGGUAN BI RONG PACKAGING MATERIAL CO.,LTD. Advantages:	1.Employing and cultivating high- level technical and managerial talents 2. Using defect-free raw and auxiliary materials and purchasing materials and components from reliable suppliers 3. Thoroughly and strictly implementing quality-control management from beginning to end 4. Bringing the creativity, experience and business acumen together for our clients to attract more customers and increase their business performance 5. Widely recognized and trusted by users 6. Meeting continuously developing economic and social needs
Brand	BR
Tube Material	PE
Tube Series	Round Tubes; Flat/Oval Tubes; Super Flat/Oval Tubes
Diameter of Round Tubes	13mm, 16mm, 19mm, 22mm, 25mm, 30mm, 35mm, 38mm, 40mm, 45mm, 50mm, 55mm, 60mm
Diameter of Flat/Oval Tubes	30mm, 35mm, 40mm, 45mm, 50mm
Diameter of Super Flat/Oval Tubes	30mm, 35mm, 40mm, 50mm
Capacity	3ml-400ml
Surface Decoration	Offset Printing, Silk Screen, Hot Stamping, Labeling
Tube Colour	Customized
Tube-sealing	Flat-edge, Arc-shaped Edge or Customized
Cap	Customized
MOQ	10,000PCS
Packaging	Customized or Using our cartons (45cm×45cm×45cm)

Showroom

Product Details

Tube Tooth	The tsim tsui parts for tube tooth of small diameter tubes
Tube Sealing	Flat edge and straight grain crimpling
Cap	Different types of caps which are suited for different tsim tsui tube tooth

Product Measurement & Description

Product Size and Specification

1. When the diameter is set, the tube length can be adjusted.
2. The chart is only for reference, and capacity and length can be customized along with the specific diameter of tube.
3. All the tube length refers to the testing result after sealing, if the customer need to seal tubes by himself, the tube length should be increased 10-20 mm.

Printing Area on Tube

1.After producing, the printing area may shrink nearly 2.0% following production.
2.Standard size for sealing mark is 2.0mm * 7.0mm , also it can be customized.
3.It is 2.0mm for no printing area of tube shoulder and 5.0mm for no printing area of tube tail. They can be adjusted according to the requirement.

Production Flow Chart

Machinery

Packaging & Transport