Product Details

Manifold Heat Pipe Tube Solar Heater Collector

1) Designed for commercial solar water heating applications
2) Reliable, efficient, twin-glass solar tubes
3) Polyurethane insulation ensures good heating performance and minimal heat Loss
4) Manifold cover material: Stainless steel or galvanized sheet
5) Frame material: Stainless steel or aluminum alloy
6) Easy plug-in installation
7) Can be connected in series to increase water heating capacity

Working principle:

1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach Tm ax, then start the auxiliary heating device.

Feature:
Collector separates with storage tank. The tank can be put in any place of house. And the collector can be put on the inclined roof or flat place.
Module design, arbitrary combination, harmony with the building perfectly;

Intelligent control and automatic operation; Anti-freeze: No water inside the tubes when it works.

The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.

Multifunction: Bathing, washing, domestic heating etc;
Work at anytime and enjoyable.

HEAT PIPE SOLAR COLLECTOR TECHNICAL DATA
MANIFOLD	Manifold casing material	Anodized aluminum alloy
	Manifold header pipe	TU2 copper
	Insulation layer	Compressed rock wool.
VACUUM TUBES	Structure	Three targets magnetron sputtering plating
	Sediment method	Cu/SS-ALN(H)/SS-ALN(L)/ALN
	Tube size	58*1800mm
HEAT PIPES:	Heat pipe material	Oxygen free copper (TU1)
	Heat pipe size	Top: Dia.14mm/ 24mm
BRACKET	Bracket:	Stronger galvanized steel / Stainless steel/aluminium alloy
	Bracket angle:	0,18,22,38,45 optional, pitched roof, flat roof optional.

HEAT TUBE: 4mm/ 24mm

head cooper: TU2 copper