Specification

1.Professional camera accessories manufacturer with many years 

2.All DSRL Camera accessories are most completed in specification and typies in  Guangdong,China. 

3.With excellent design team

2015 New G3 Steadycam Gimbal 3 Axis                   Brushless Gimbal for Gopro Camera Use                  

Specifications

• Introduction:

  Heading Flower me mode: pitch and roll locking, heading with holding the direction of a smooth running.

  Heading and pitching Flower me mode: the two locking, heading and pitch direction as the direction of the handheld smooth rotation.

  Lock mode: the heading, pitch and roll are locked. 

  Parameter:

  Working voltage: Min. 7.0V, Max. 17.0V, Standard. 12.0V.

  Static attitude tracking accuracy: Min. 0.01, Max. 0.05, Standard. 0.02.

  Motion tracking precision: Min. 0.1, Max. 0.5, Standard. 0.2. (motor overload<2G)

  Motor overload protection current: 800mA

  Pitching angle motion ranges: -100~35.

  Roll motion ranges: -45~45.

  Course angle motion ranges: -150~150.

  Course angle motion ranges: -50~50

  Pitching follower me rate: 2°~50°/sec..

  Heading follower me rate: 3°~150°/sec..

  Net weight: 305g 

   

  Functions of lamp button:

  1.     1 click: 1 flash, heading flower me mode.

  2.     2 clicks: 2 flash, heading and pitching flower me mode.

  3.     Locked mode: light on, heading, pitching flower me and roll modes are locked.

  Status indicators:

  Blue light flash 3 times: full battery.

  Blue light flash 2 times: standard battery.

  Blue light flash 1 time: low battery. 

   

  Function Introduction:

   1.(heading Following me mode): both pitch and roll angles being locked, heading will rotate with the moving of the gimbal.

   2. Heading and pitch following me mode: roll angle being locked, heading and pitch will rotate with the moving of the gimbal

   3. Lock Mode : all of Heading ,Pitch and Roll angles are locked

   

  Attention:

  1.Power up after install the action camera 3 to the Gimbal. 

  The skills of adjusting pitch : double click the button first to be in heading and pitch following me mode. Adjust the attitude to move the pitch to the angle you want , then press the button once to lock the angle of pitch being in the heading following me mode .

  Autodyne mode: trun 180 degree of the gimbal,(the USB port facing you). adjust the angle of pitching through the method above, then you can Autodyne easily.

  Initialize the FY-G3 Ultra Gimbal (FY-G3 Ultra Gimbal needs to be initialized when the following situation appears ):  

  1. After power on, the angle of pitch has a little angle difference with the horizon line 

  2. After power on, the angle of roll has a little angle difference with the horizon line 

  3. When the heading is in the till condition, the angle of heading amends frequently in a small angle .

  The method of Initializing the FY-G3 Ultra Gimbal:

  Keep the gimbal in the still condition, then power on , it will initialize automatically.after that the gimbal can work normally.

  Method of gimbal initialization:

  Placed gimbal, remain motionless, then turned on the power, wait for gimbal movement after the operation, you can pick up the gimbal to work normally.