SMT Quadrate Ceramic Tubes
USD $0.05 - $0.2 /Piece
Min.Order:1000 Pieces
Changsha Ultronic Ceramic Technology Co., Limited
SMT Quadrate Ceramic Tubes
The quadrate metalized ceramic tube is propitious to apply in SMT smooth surface.It mainly applies for SMD gas tube arresters.
Metalized ceramic can be applied in the production of porcelain controls, surge arresters, surge arrester with insulation,
high temperature resistance, good air tightness, fast heat dissipation, high mechanical strength and high stability in harsh
working environment, good soldering and solder with gold, silver, copper, nickel and so on.
Characteristics of Metallized ceramic :
High mechanical strength High dielectric strength
Low loss in high frequency Low gas leakage coefficient
Low dielectric constant High voltage resistance
Good dimension Convenient soldered
Materials Performance
| Item |
Unit | Performance | |||||
Alumina ceramic |
steatite ceramic | |||||||
90% | 92% | 95% | 96% | |||||
Ceramic Body
| Appearance | Color | - | white,ivory white,brown,black | White off-white | |||
Mechanical Characters |
Bulk Density | g/cm3 | ≥3.6 | ≥3.65 | ≥3.7 | ≥3..75 | 2.7 | |
Water Absorption | % | 0 | 0 | |||||
Flexural strength | MPa | 280 | 300 | 310 | 320 | 150 | ||
(HV) Hardness | GPa | 12 | 5.8 | |||||
Thermal Characters |
Coefficient of linear thermal expansion | 20℃~800℃ ×10-6mm/℃ | 6.3~7.3 | 6.4~7.4 | 6.5~7.5 | 6.8~7.8 | 8.0 | |
Thermal Conductivity | W/(m.K) | 12 | 16 | 20 | 23 | 2 | ||
Electrical Characters |
Dielectric constant(1MHz) | — | 9~10 | 9~10 | 9~10 | 10 | 7.5 | |
Dielectric loss angle | ×10-4 | ≤6 | ≤5 | ≤4 | ≤3 | 8 | ||
Dielectric Strength | KV/mm | 15 | 20 | 24 | 28 | 18 | ||
Metalized Ceramics |
Gas leakage coefficient | Pa.m3/s | ≤10-8 | - | ||||
Volume resistivity | Ω.cm | ≥1015 | - | |||||
Combined strength | MPa | ≥120 | - | |||||
Thickness of Metal | μm | ≥20 | - |
Company Profile
Changsha Ultronic Ceramic Technology Co., Ltd. is located in Changsha City, the capital of Hunan Province.
Since its establishment in September 2010, Ultronic has been devoted to manufacturing alumina ceramics
and steatite ceramics for electric components and industrial ceramics. Now, we have the forming technologies
of hot pressing, dry pressing, injection molding, tape casting, and isostatic pressing. We also have the special
process of surface metallization, glazing, and polishing. Our main products include ceramic thermostat housing,
ceramic rod, metalized ceramic GDT tube, faucet cartridge ceramic disc, ceramic insulating plate and so on.
And we supply to leading companies in respective business, such as and so on.
Some of our products are as below.
Alumina Ceramic Substrate
Thermal Ceramic Plate
Ceramic Case/Shell
Ceramic Tubes for Fuse or Discharge Tube
Magnetron Metalized Ceramic
Ceramic Chips,etc.