Main Products: Alumina Ceramic ,Metalized Ceramic ,Water faucet Ceramic ,Zirconia Ceramic ,Steatite Ceramic
Excellent Ceramic Components
USD $0.01 - $0.02 /Piece
Min.Order:100000 Pieces
Quick Details View All >
Changsha Ultronic Ceramic Technology Co., Limited
Credit Member 4 years 
Business Type: Manufacturer
Changsha Hunan ChinaMain Products: Alumina Ceramic ,Metalized Ceramic ,Water faucet Ceramic ,Zirconia Ceramic ,Steatite CeramicProduct Details
Alumina
Feature:
High mechanical strength High dielectric strength
Low loss in high frequency Low gas leakage coefficient
High voltage resistance Good dimension
The ceramic chips widely apply in the electronic component seal because the precise dimension and the insulating ability
Materials Performance
| Item |
Unit | Performance | |||||
Alumina ceramic |
steatite ceramic | |||||||
90% | 92% | 95% | 96% | |||||
Ceramic Body
| Appearance | Colour | - | white,ivory white,brown,black | white,off-white | |||
Mechanical Characters |
Bulk Density | g/cm3 | ≥3.6 | ≥3.65 | ≥3.7 | ≥3..75 | 2.7 | |
Water Absorption | % | 0 | 0 | |||||
Flexural strength | MPa | 280 | 300 | 310 | 320 | 150 | ||
(HV) Hardness | GPa | 12 | 5.8 | |||||
Thermal Characters |
Coefficient of linear thermal expansion | 20℃~800℃ ×10-6mm/℃ | 6.3~7.3 | 6.4~7.4 | 6.5~7.5 | 6.8~7.8 | 8.0 | |
Thermal Conductivity | W/(m.K) | 12 | 16 | 20 | 23 | 2 | ||
Electrical Characters | (1MHz) Dielectric constant(1MHz) | — | 9~10 | 9~10 | 9~10 | 10 | 7.5 | |
Dielectric loss angle | ×10-4 | ≤6 | ≤5 | ≤4 | ≤3 | 8 | ||
Dielectric Strength | KV/mm | 15 | 20 | 24 | 28 | 18 | ||
Metalized Ceramics |
Gas leakage coefficient | Pa.m3/s | ≤10-8 | - | ||||
Volume resistivity | Ω.cm | ≥1015 | - | |||||
Combined strength | MPa | ≥120 | - | |||||
Thickness of Metal | μm | ≥20 | - | |||||
Changsha Ultronic Ceramic Technology Co., Ltd is located in Changsha City, the capital of Hunan Province. Since its establishment in September 2010, Ultronic has been devoted to manufacturing alumina ceramics and steatite ceramics for electric components and industrial ceramics. Now we have the forming technologies of hot pressing, dry pressing, injection molding, tape casting, and isostatic pressing. We also have the special process of surface metallization, glazing, and polishing. Our routine products include ceramic thermostat housing, ceramic rod, metalized ceramic GDT tube, faucet cartridge ceramic disc, ceramic insulating plate and so on. And we supply to leading companies in respective business, such as and so on.
Below are the kinds of ceramics
Contact Supplier
You May Like
New Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln