Name: Alumina Ceramic Tubes With Excellent Quality And Long Working Time
Brand: Ultronic
Availability: InStock

Product Details

Alumina Ceramic Tubes With Excellent Quality And Long Working Time

Specifications

1.Material:Alumina/zirconia

2.Method of moulding:dry pressing

3.Corrosion resistance

4,Custom design

5,Eco-friendly

Features:

High mechanical strength High dielectric strength

Low loss in high frequency Low gas leakage coefficient

High voltage resistance Good dimension

The ceramic chips widely apply in the electronic component seal because the precise dimension and the insulating ability

Materials Performance

	Item		Unit	Performance
				Alumina ceramic				steatite ceramic
				90%	92%	95%	96%	steatite ceramic
Ceramic Body	Appearance	Colour	-	white,ivory white,brown,black				white,off-white
	Mechanical Characters	Bulk Density	g/cm3	≥3.6	≥3.65	≥3.7	≥3..75	2.7
		Water Absorption	%	0				0
		Flexural strength	MPa	280	300	310	320	150
		(HV) Hardness	GPa	12				5.8
	Thermal Characters	Coefficient of linear thermal expansion	20℃~800℃ ×10-6mm/℃	6.3~7.3	6.4~7.4	6.5~7.5	6.8~7.8	8.0
	Thermal Characters	Thermal Conductivity	W/(m.K)	12	16	20	23	2
	Electrical Characters	(1MHz) Dielectric constant(1MHz)	—	9~10	9~10	9~10	10	7.5
		Dielectric loss angle	×10-4	≤6	≤5	≤4	≤3	8
		Dielectric Strength	KV/mm	15	20	24	28	18
Metalized Ceramics		Gas leakage coefficient	Pa.m3/s	≤10-8				-
		Volume resistivity	Ω.cm	≥1015				-
		Combined strength	MPa	≥120				-
		Thickness of Metal	μm	≥20				-

Typical Applications

The metallized ceramics are widely used on the High Vacuum,High Voltage,High Pressure condition.Including:

Applications:

Feed-through insulators

Power switches

Insulating discs

Traveling wave tubes

Insulator rings and cylinders

Vacuum interrupters

Headers

Windows

High-power receptacles

Power grid tubes

Precipitator products

X-ray tubes

Company Profile

Changsha Ultronic Ceramic Technology Co., Ltd. is located in Changsha City, the capital of Hunan Province. Since its establishment in September 2010, Ultronic has been devoted to manufacturing alumina ceramics and steatite ceramics for electric components and industrial ceramics. Now, we have the forming technologies of hot pressing, dry pressing, injection molding, tape casting, and isostatic pressing. We also have the special process of surface metallization, glazing, and polishing. Our main products include ceramic thermostat housing, ceramic rod, metalized ceramic GDT tube, faucet cartridge ceramic disc, ceramic insulating plate and so on. And we supply to leading companies in respective business, such as and so on.

We have below product categories

Ceramic Substrate

Zirconia Ceramic

Steatite Ceramic Parts

Ceramic Pin/Rod

Ceramic Tube/Ring

Ceramic Lamp Holder

Thermostat Ceramic Parts

Ceramic Faucet Cartridge Discs

Metalized Ceramic Parts