Specifications
1. concentrate different mineral with different magnetism2. 20000gass
3. low power
4. dry separating method
Three-Disc electromagnetic separator machine for sorting magnetic minerals mixed ore
Introduction of three disk electromagnetic separator:
Three-disc electromagnetic separator is sorting mineral size less than 2-3mm of weakly magnetic minerals and rare metal ore selection, it is a very important mineral processing equipment. Three-disc electrmagnetic separator have 3 models.
Three-disc electromagnetic separator is for a variety of strong magnetic minerals mixed ore separation, according to the difference of magnetic minerals, can achieving efficient separation of minerals can form different intensity magnetic disk by adjusting the excitation current levels, can also be adjusted each level disk and sensing distance between dressing grain is to get different magnetic induction intensity, reaching a one-time separation of various minerals. This device is widely used in ilmenite, monazite, tungsten, tin, tantalum, iron ore and other minerals with magnetic and non-magnetic dry sorting.
Features of three disk electromagnetic separator:
The equipment have reasonable structure, small footprint, simple operation and maintenance, its one-time separate variety of ferromagnetic minerals, weakly magnetic, non-magnetic and so on. Operations can be adapted to water-lack mines.
Product Structure of three disk electromagnetic separator:
The following major structural for diagram 600mm Double-disc Dry strong magnetic separator to do next explain. Main part of the separator by the "mountain" shaped magnetic system, magnetic system suspended above the rotating disk and vibration slots (or belt) components.
Structure of Three-disc electromagnetic separator
1.Magnetic separator-feeding hopper 2.Magnetic separator-feeding cylinder
3.Magnetic separator-receiving hopper 4.Magnetic Magnetic Separator-sieve trough
5.Magnetic separator-vibrating trough 6.Excitation control cabinet
7.Magnetic separator-Disc 8.Magnetic separator-Reed disk
Specification of three disk electromagnetic separator:
Model | Unite | 3PC-500 | 3PC-600 | 3PCX600 |
Magnetic intensity | Hauteur | Distance to beltsurface 2mm | Distance to beltSurface 2mm | Distance to belt 2mm |
Number of |
| 3 | 3 | 3 |
Diameter of | mm | 500 | 600 | 600 |
Revolution of magnetic disk | r/min | 25-40 | 22-38 | 22-32 |
Power supply | V | 380 | 380 | 380 |
Exciting coil | Unit | 4 | 4 | 4 |
Matching motor | kw | 0.75 | 1.5 | 1.5 |
Exciting power | kw | 1.5 | 1.6 | 1.6 |
Coil temperature | °C | 65 | 65 | 65 |
Rated currentof coil | A | 1.1-1.8 | 1.2-1.9 | 1.2-2.2 |
Duty rating | Continuous | Continuous | Continuous | |
Feed width | mm | 210 | 300 | 300 |
Feed size | mm | ≤2 | ≤2 | ≤2 |
capacity | kg/h | 100-500 | 120-800 | 80-800 |
Overall Size | mm | 2800×800×1220 | 3200×870×1160 | 3150×900×1250 |
Weight | kg | 1900 | 2200 | 2300 |
PHOTOS of three disc electromagnetic separator:
One Stop Service
1. Start by running the mineral beneficiation experiment. To provide our clients with best solution accordinly.
2. Besides supply the flowchart design & equipments, we also provide the infrastructure design.
3. After the installation, debugging of the equipments, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
PER-SALE SERVICES
1. Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly.
2. Select equipments model, provide flowchart design for our clients.
3. Design & manufacture products according to clients' demands.
AFTER-SALE SERVICE
1. Pre-check and test the products before delivery.
2. Deliver the whole plant design for our clients which including:Infrastructure & Electrical system & Pipeline design.
3. Trace the status of the shipping until the products received.
4. Prepare required documents to let clients pass custom clearance.
5. Dispatch experts to carry out below service on site.
1). Installation & Debug of the machinery on site.
2). Train the first-line operators & technical personnel on site.
3). Carry out any other service clients may needed.
6. Provide technical exchanging & spare parts for life -long term.
Ganzhou Gelin Mining Machinery Co., Ltd. is an expert manufacturing mining machines in China.Our company is located in Guzhang industrial zone, Shicheng county, Jiangxi province, covering an area of over 30,000 square meters, having more than 30 sets of heavy processing equipment and with an annual output of more than 2000 sets of mining machinery. There are more than 5 medium and senior engineers in our company. We have a strong R&D department and have been cooperating with domestic and overseas Scientific Research Institutes for many years. Our purpose is to track international new technology in time and promptly and make continuous innovation in technology for manufacturing high-grade equipment.
Our factory located at: Ganzhou city, Jiangxi province, China.
You can take airplane from your country to Guangzhou/Shanghai /Beijing airport, China, then, flight to Ganzhou Huangjin Airport. We will pick you up at Ganzhou airport.
Below are some flights details for you refer:
Product show for Our Other Machine Products of Our Factory:
♦ Our Factory Can Do More:
Besides the above mentioned products, we can also design and manufacture many kinds of special mining machines and automatic processing lines according to the requests of customers.
If you are in need of detailed information, please inform us. We will provide you with total solutions according to your specific requirements in time.
♦ Clients from Different Countries Visited Our Factory:
1,Q: Are you professional? Do you have ever engaged in the implementation of the overseas mining projects?
A: Yes, we have professional mineral separation team in this industry. Our engineers who perennial activities in South-east Asia, Eastern Europe, Africa and so on, they are expert at the Gold ore, Iron ore, Manganese ore, Tantalum & Niobium, Tungsten and other extraction production.
2,Q:I am a new miner, how can I know your machine's quality?
A: We suggest you can send some samples to us before you buy the machine, we will use our machines test the samples and let you know the result.
3,Q: Can I come to see the machine real working on mining site?
A: Yes, we will take you come to our customer's mining site to see the real machines operation and runing.
4,Q: Now we plan to make the production line separation and purification of this mineral. How to deal with it? What type of equipment we need to use?
A: According to mineral information and mining conditions from customers, our engineer design the best mineral processing line and the appropriate equipment to meet the specific needs of customers.
GELIN dispatch engineer come to customer mining site to support installation/ commissioning/ training worker.
Thanks for kindly inform us the following information, then we can find the suitable machine for you, make the proposal, and provide the high effective quotation.
1). What type is your mining? Is it rock stone? or it is sand?
2). What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to start?
4). What is the ingredient of the raw ore? How much percent % of each minerals?
5). Is there any analysis report? if yes, please send to me.
5,Q: If we give this order to your company, what kind of service you can offer?
A: First of all, if needed, our engineers will go to your mining site for field investigation to make the best designing scheme. After the equipment arrived, we will send engineers to stationed in mine site to conduct the construction of the project, the installation and debugging and the staff training and ensuring the production are always working normally.
6,Q: The technology you designed need water? How much water it will need? What will do if there is a water shortage in our mine site?
A: For this kind mineral, we have dry and wet two different mineral separations. Our engineers will choice the best craft and equipments by the actual conditions that ensure the production line working normal in lack water or less water condition.
7,Q: What promises do you have about the quality of the equipment?
A: Warranty Time: one year. Meanwhile, we will provide a list of consumable parts, and can priority to provide you with adequate vulnerable parts.