4Pcs Universal LED Solar Energy Power Colorful Wheel Centre Hub Flash Light Lamp
USD $51.33 - $57.75 /Set
Min.Order:1 Set
Foshan Seametal Technology Co., Ltd.
4Pcs Universal LED Solar Energy Power Colorful Wheel Centre Hub Flash Light Lamp
Item Name | Car Wheel Centre Hub Flash Dazzle Light |
Model Name | B11130 |
Application | Universal |
Input Voltage | 12V |
Material | Plastic |
Certificate | CE RoHS |
Color temperature | 6000-7000K |
Light color | Red, Blue, Green, Red Green, Blue Green, Blue Red, Blue Red Green.(seven colors changed) |
Package | 1 x Car Wheel Centre Hub Flash Dazzle Light (it is without remote control) 1 x box |
Product discription:
Waterproof, solar charger, stainless steel, with light feeling was still not bright lights, daytime light sensation not bright lights, with four light mode, normally on, flash, atmosphere lamp, random transform function of color, seven color, general 90% 0 middle roller shell model.
Product Features:
- Use high-power solar battery charging board, automatic fast charging.
- Built-in high capacity lithium battery, A heart electricity, no memory effect, longer life.
- Ultra bright LED chip imports, night driving a warning, decoration, beautiful effect.
- It Can open function, using the optical and sublime sensing system, open automatically when the car is driven at night lights flashing.
- Only close function, using the double chip machine, there is delay closed system, vehicle static in parking or 40 seconds automatically shut off the light.
Installation:
- Stick the small slot type slot type screwddriver into the vehicle's logo cover of the whel and pry it out slowly.
- Measure the diameter and width of the vehicle's logo cover with a caliper or a common ruler.
- Loosen the screws of setting feet with cross screwdriver. Stretch the feet position to faciliate size adjustment.
- Adjust the size of the feet position of wheel lights according to the size of the vehicle's logo cover measured by the caliper.
- Pick up the vehicle's logo cover with caliper.Get the height from the heel bottom to the top.
- Stretch the feet position of wheel lights to the same size of the car's feet position.Install the clip according to the height of the card feet.4 feet should all be installed and then the card position installation is completed.
- Take the spring out. Put the spring in the card position which is in middle of the card feet position.
- Put the product into the tire intermediate.
- Longly press 3 seconds to turn on after installation.
Noted:
- please put the product in the sun for more than 2 hours before installation.
- Often clean the surface of solar panels, in order to guarantee the normal work.
- Tighten the screws, install the product, so as not to appear the product would fall off when the high speed of the wheel.
The pictures are for reference only.The actual product shall prevail.
By Joe