Product Details

Product Description

Technical specifications:

Model	STEEL TOOTH BIT
IADC CODE	116 117 12 6127 136 137 216 217 226 226 316 317 326 327 336 337 115 125 135 215 225 235 315 325 335 114 124 214 314 111 121 131 346 347
IADC CODE
available sizes:	From 2 7/8 to 26” larger sizes for hole opener bit ,reamer bit
advantage	most favourable price and best qualtity
bearing type:	sealed bearing and non-sealed bearing HJ(metal sealed journal bearing) HA (rubber sealed journal bearing aircooled bearing type
Formation or layer	soft ,medium soft ,hard,medium hard,very hard formation
Button size (extra features)	Button bit,saw teeth 1) Y-Conical teeth 2) X-chisel teeth 2) 3)K- wide teeth 4)G- Gague protection
Material	Tungsten Carbide
Packing	fumigation free of wooden case
Payment terms	T/T(30% downpayment and 70%balance before shipping.)
Delivery terms	By sea or by air
Delivery time	Within 7-15 work days
Main market	Canada, USA,Middle east ,Africa,Europe

Cutting Structure

The durability of premium tungsten carbide insert is improved with new formulas and new techniques and new techniques. The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.

Bearing Structure

Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone ropping to minimum.

Product Application

It is suitable for the shallow well, water well and geothermal well.

Recommended Drilling Parameter

IADC	WOB (KN/mm)	RPM (r/min)	Applicable Formations
111	0.3~0.75	200~80	Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, etc.
121	0.3~0.85	200~80	Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc.
131	0.3~0.95	180~80	Soft to medium formations with low compressive strength and high drillability, such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc.
211	0.35~0.95	180~80	Medium formations with high compress strength, such as medium soft shale, hard gypsum , medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc.
241	0.35~0.95	180~70	Medium hard formations with high compressive strength, such as abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble,etc
321	0.4~1.0	150~70	Hard semi-abrasive formations, such as abrasive shale,limestone,sand stone,dolomite, hard gypsum,marble,etc.
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.

Sealed Steel Tooth Tricone Bit

Cutting Structure

The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.

Gauge Structure

Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.

Bearing Structure

High precision roller bearing with two thrust faces. Ball lock the cone.Thrust faces hardface with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.

Seal and Lubrication

Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability.

Product Application

It is suitable for various formations, and achieves high RPM under low to medium WOB application

Recommended Drilling Parameter