Specifications

Model: PM-600
Table size: 1270**285mm
X/Y/Z travel: 600 / 400 / 130 mm

Knee type CNC milling machine

 

(1)   Features:

1. Single unit piece design head stock
2. Harden & precious grounded box way with Turcite-B coating
3. High tension Meehanite casting iron
4. Dish-in coolant tank system
5. MS window based IPC controller
6. 1.0 GHz Pentium III CPU
7. PS2 Tracking ball mouse & water proof keyboard
8. 12.1” LCD display
9. Friendly GDP system
10. 32mm C3 grade ball screws on X & Y axis
11. 25mm C3 grade ball screw on Z axis
12. Auto lubrication system
13. Table splash guard

(2)   Specifications

Model	PM-600
X axis travel	600 mm
Y axis travel	400 mm
Z axis travel	130 mm
Spindle nose to table	150-450 mm
Spindle center to column front	360 mm
Rapid feedrate X & Y axis	5000 mm/min
Rapid feedrate Z axis	5000 mm/min
Cutting feed	3000 mm/min
Ballscrew X, Y axis	32 x P5 mm
Ballscrew Z axis	25 x P5 mm
Table size	1270 x 285 mm
Table up / down travel	33 mm
Max. load permissible	150 kgs
T-slot number	3
T-slot pitch	70 mm
T-slot wide	16 mm
T-slot	3 x 18 x 110 mm
Spindle speed	8000 rpm
Quill diameter	110 mm
Spindle taper	NT40
Spindle motor	5HP
Machine weight (approx)	2000 kgs
Floor space (approx)	2380 x 2170 mm
Size (W x D x H)	1780 x 1970 x 2390 mm
Positioning	0.02 / 300 mm
Repeatability	±0.01 mm
Computer	12.1” TFT LCD (DOM-1 GB / DOL128 / DOM128)
Max. tool size	20 mm

 

(3)   Standard accessories:

1. Coolant system
2. Automatic lubrication system
3. Work lamp
4. Leveling bolts and pads
5. Knee crank handle
6. Table guard
7. Tool box with service tools
8. Transformer

(4)   Optional accessories:

1. Work air blast
2. Air power drawbar (Turning speed lower than 5000 rpm suggested)
3. Direct united hydraulic power drawbar (Turning speed higher than 5000 rpm suggested)

 

If you have any further discussion or information, please feel free to contact us directly,thank you.