High Durability of the Whole Machine Diaphragm Jig

The Jigging process is carry out by the rubber diaphragm make up and down reciprocating motion caused 

by the medium (water)knock.The motor drives by the big belt wheel rotate through the triangle belt,so that 

the connecting rod of the eccentric shaft to move up and down,the rocker arm is connected with the conn

ecting rod can move up and down,the rocker arm and double connecting rod rubber diaphragm,so that the 

diaphragm make reciprocating motion,it start to jig.

Note: according to the request this screen can not supply). After the selected ore was sent to jigging 

chamber,the diaphragm's role in encouraging,mineral particles in the medium were stratified according 

to the proportion;thin and heavy particlesthrough the artificial bed particles gap and sieve,sinking in 

the middle and top on jigging bucket storage hopper.Thick and light mineral particles materials.

Jig machines need water to work, and it loosens materials in vertical alternative water-flows, and it forms different layers of materials

of different densities and discharges both layers from up and down

discharging ports separately. The basic composition of jigger is jigging chambers, also called jigging boxes,

and there are screens in each chamber.Water and raw ore will be fed from one end of the jigger screen,

the ore granules will move in the vertical alternative water-flows. Layers will be formed because of density difference of materials.

The minerals with small density will be in the up layer and will flow together with the up pulp flow while material with bigger

density will be in the down layer and will discharged from the down discharging port as jigging concentrate.