Specifications

Blow Moulding Machine
1.Materials:SS304
2.Capacity:2000bph-5000bph
3.Bottle volumes:100ml-2L
4.CE,SGS,ISO

Full Automatic Bottle Blow Moulding Machine

 Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low costhigh efficiencyeasy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to installtest and start up.
14). Low rejection rate: less than 0.2 percent.

 

Technique Parameter of blow molding machine:

 

Model	KM-A6
Productivity	Depend on bottle design	4500-6000PCS/H
Product type	Body diameter	20mm-100mm
	Height	50mm-350mm
	Neck diameter	15mm-38mm
Mold	Cavity	6cavities
	Mold thick	240mm
	Mold volume	240*320*760mm
Main machine power	Electrical source power	380v 3Phase /220v 3Phase  50/60HZ
	Rated Power	65kw
	Really use power	18kw
Air source	LP air compressor	2.0m3/min 1.0MPa 1set
	HP air compressor	3.2m3/min 3.0MPa 2sets 1set
	Air dryer	3.0m3/min 3.0MPa 1set
Cooling water	Cooling water	5HP
Size	L*W*H	2000*3200*1800mm
	Weight	5200kg
Auxiliary equipment(preform unscrambler)	L*W*H	276*106*186mm
	Weight	250kg
Resin available	/	PET
Main part:
Pneumatic part	Valve	CKD/SMC
	Cylinder
Electric part	PLC	LG /Mitsubishi
	Operating system	LG / Mitsubishi
	Relay	OMRON
Note	All of the electrical components adopts CEULCCC approved international advanced high-tech product